Page history
16 September 2024
→Attach and secure the knobs
+6
→Close the aluminum case
-155
→Plug the control flat cable into the main board
+75
→Plug the display flat cable into the display
+359
→Secure the control board, silicone buttons and display to the aluminum case top
+4
→Assemble the display on the control board
-222
→Secure the top-spacers on the control board
-279
→Plug USB-C adapter
+62
→Plug USB-C adapter
→Plug USB-C adapter
+11
→Plug SD-card adapter
+34
→Plug SD-card adapter
+194
→Assemble the Main Board into the aluminum case bottom
+15
→Assemble the Main Board into the aluminum case bottom
-6
→Assemble the Main Board into the aluminum case bottom
-5
→Assemble the Main Board into the aluminum case bottom
+8
→Assemble the Main Board into the aluminum case bottom
-24
→Stick the SD-card holder cover
-741
→Assemble the Main Board into the aluminum case bottom
-1
→Assemble the Main Board into the aluminum case bottom
+898
→Stick the rubber feet to the aluminum case bottom
→Stick the rubber feet to the aluminum case bottom
+15
→Stick the rubber feet to the aluminum case bottom
+52
→Install the thermal block
+2
→Install the thermal block
+71
15 September 2024
14 September 2024
→Install the thermal block
+1
→Install the thermal block
+16
→Install the thermal block
+721
→Install the thermal block
+6
→Plug the display ribbon cable into the RPi4
+67
→Plug the display ribbon cable into the RPi4
+15
→Install the thermal block
+5
→Install the thermal block
10 September 2024
9 September 2024
→Install the thermal block
+41
Undo revision 14603 by Jofemodo (talk)
+23,691
no edit summary
-23,691
→Install the thermal block
→Install the thermal block
-147
→Plug the display ribbon cable into the RPi4
-1
→Stick the rubber feet to the aluminum case bottom
+8
→BOTTOM PART
+4
Created page with "='''Previous Requirements'''= <br clear=all> =='''BOM V5.1 kit'''== <br clear=all> 800px|right * V5.1 Aluminum Case ** Bottom ** Top * Mai..."
+26,930