3,455
edits
Changes
Jump to navigation
Jump to search
Assembling Zynthian Kit V5.1 (view source)
Revision as of 08:49, 16 September 2024
, 08:49, 16 September 2024→Stick the SD-card holder cover
Line 359:
Line 359:
<br clear=all>
−=='''Stick the SD-card holder cover'''==
−<br clear=all>
−This little piece of plastic is just to make sure you can't accidentally push the SD card into the gap between its slot and the case, thus losing it.
−But ... can this happen? Well, it's not easy, but we provided this nice piece of plastic for a reason ;-)
−<br clear=all>
−[[File:capture000029_fixed_wiki.JPG|600px|right]]
−'''1.''' Look for the SD-card holder cover in the wiring bag.
−<br clear=all>
−[[File:capture000030_fixed_wiki.JPG|600px|right]]
−'''2.''' Remove the protective sheet.
−<br clear=all>
−[[File:capture000034_fixed_wiki.JPG|600px|right]]
−'''3.''' Stick it on the main board's SD-card holder, so it is well-adjusted, touching the aluminum case.
'''5.''' Plug the USB-C connector into the RPI4's USB-C socket.
'''5.''' Plug the USB-C connector into the RPI4's USB-C socket.
−<br clear=all>
<br clear=all>