Changes

[[File:IMG_4045_fixed_wiki.JPG|600px|right]]

[[File:IMG_4045_fixed_wiki.JPG|600px|right]]

[[File:thermal_pad_cut_v51.png|450px|right]]

[[File:thermal_pad_cut_v51.png|600px|right]]

[[File:IMG_4142_fixed_wiki.JPG|600px|right]]

[[File:IMG_4142_fixed_wiki.JPG|600px|right]]

<br>

<br>

'''3.''' Using the rule-meter and the scissors or cutter, cut 4 little pieces of thermal pad with these recommended sizes:

'''3.''' Using the rule-meter and the scissors or cutter, cut 4 little pieces of thermal pad with these apr sizes:

<br>

<br>

* 20 x 28 mm

* 20 x 28 mm

* 19 x 12 mm

* 19 x 12 mm => This is the most important one!

* 14 x 9 mm

* 14 x 9 mm

* 11 x 11 mm

* 11 x 11 mm

[[File:IMG_4156_fixed_wiki.JPG|600px|right]]

[[File:IMG_4156_fixed_wiki.JPG|600px|right]]

'''4.''' Remove the blue protective sheet from the 3 smaller pieces and stick them to the inner side of the thermal block, the one that makes contact with the RPi4. You'll recognize it because it has 3 small rectangular islands that fit the size of the 3 smaller pieces you cut out. You can use your finger to press the thermal pad and stick it. Use your fingernail to cut off the excess, if any.

'''4.''' Remove the blue protective sheet from the 3 smaller pieces and stick them to the inner side of the thermal block, the one that makes contact with the RPi5. You'll recognize it because it has 3 small rectangular islands that fit the size of the 3 smaller pieces you cut out. You can use your finger to stick it, pressing and extending the thermal pad. Use your fingernail to cut off the excess, if any.

<br clear=all>

<br clear=all>