3,451
edits
Changes
Jump to navigation
Jump to search
Line 260:
Line 260: − + Line 267:
Line 267: − + Line 273:
Line 273: − + Line 282:
Line 282: − + Line 289:
Line 289: − +
Assembling Zynthian Kit V5.1 (view source)
Revision as of 08:42, 16 September 2024
, 08:42, 16 September 2024→Assemble the Main Board into the aluminum case bottom
[[File:IMG_4191_fixed_wiki.JPG|600px|right]]
[[File:IMG_4191_fixed_wiki.JPG|600px|right]]
'''2.''' Take 4 x ISO7380 M2.5 screws. They are the smaller ones with rounded head.
'''4.''' Take 4 x ISO7380 M2.5 screws. They are the smaller ones with rounded head.
<br clear=all>
<br clear=all>
[[File:IMG_4230_fixed_wiki.JPG|600px|right]]
[[File:IMG_4230_fixed_wiki.JPG|600px|right]]
'''3.''' Plug the RBPi4 (with the thermal block attached) on the Main Board's RBPi4 socket, the big one with 2 rows of 20 pin-holes each. Pay attention to not bend any pins. Also note that the display flat cable should pass through the rectangular hole in the main board, as seen in the photos (zoom in if you have doubts).
'''5.''' Plug the RBPi5 (with the thermal block attached) on the Main Board's RBPi socket, the big one with 2 rows of 20 pin-holes each. Pay attention to not bend any pins. Also note that the display flat cable should pass through the rectangular hole in the main board, as seen in the photos (zoom in if you have doubts).
<br clear=all>
<br clear=all>
[[File:IMG_4195_fixed_wiki.JPG|600px|right]]
[[File:IMG_4195_fixed_wiki.JPG|600px|right]]
'''4.''' Fix the thermal block to the main board from the backside using the 4 x M2.5 screws.
'''6.''' Fix the thermal block to the main board from the backside using the 4 x M2.5 screws.
[[File:IMG_4221_fixed_wiki.JPG|600px|right]]
[[File:IMG_4221_fixed_wiki.JPG|600px|right]]
'''5.''' Take 7 x ISO7380 M3 screws. They are the mid-size ones with rounded head.
'''7.''' Take 7 x ISO7380 M3 screws. They are the mid-size ones with rounded head.
<br clear=all>
<br clear=all>
[[File:IMG_4276_fixed_wiki.JPG|600px|right]]
[[File:IMG_4276_fixed_wiki.JPG|600px|right]]
'''6.''' '''Remove the transparent protective sheet''' from the piece of thermal pad stuck to the thermal block bottom and softly place the main board in the aluminum case bottom. You will find it more comfortable to grab the thermal block to do this operation. Fix it using the 7 x ISO7380 M3 screws.
'''8.''' '''Remove the transparent protective sheet''' from the piece of thermal pad stuck to the thermal block bottom and softly place the main board in the aluminum case bottom. You will find it more comfortable to grab the thermal block to do this operation. Fix it using the 7 x ISO7380 M3 screws.
<br clear=all>
<br clear=all>