Changes

Jump to navigation Jump to search
Line 527: Line 527:  
<br clear=all>
 
<br clear=all>
   −
[[File:capture000106_fixed_wiki.jpg|600px|right]]
+
[[File:build51_join_parts_display_01.jpg|600px|right]]
    
'''1.''' Place the two parts one aside the other, forming 90º angle, as shown in the picture.
 
'''1.''' Place the two parts one aside the other, forming 90º angle, as shown in the picture.
Line 533: Line 533:  
<br clear=all>
 
<br clear=all>
   −
[[File:capture000109_fixed_wiki.jpg|600px|right]]
+
[[File:build51_join_parts_display_02.jpg|600px|right]]
    
'''2.''' Using two fingers, one on each hand, softly pull the display's FPC tongue until it's open. Insert the flat ribbon cable coming from the RPi4 into the bottom's part. Do it straight, without bending or twisting it in any way, so the blue side is face down.
 
'''2.''' Using two fingers, one on each hand, softly pull the display's FPC tongue until it's open. Insert the flat ribbon cable coming from the RPi4 into the bottom's part. Do it straight, without bending or twisting it in any way, so the blue side is face down.
Line 539: Line 539:  
<br clear=all>
 
<br clear=all>
   −
[[File:capture000110_fixed_wiki.jpg|600px|right]]
+
[[File:build51_join_parts_display_03.jpg|600px|right]]
 +
 
 +
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
 +
 
 +
<br clear=all>
 +
 
 +
[[File:build51_join_parts_display_04.jpg|600px|right]]
    
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
 
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

Navigation menu