3,451
edits
Changes
Jump to navigation
Jump to search
Line 264:
Line 264: − + − [[File:IMG_4230_fixed_wiki.JPG|600px|right]] Line 271:
Line 270: − +
Assembling Zynthian Kit V5.1 (view source)
Revision as of 09:49, 16 September 2024
, 09:49, 16 September 2024→Assemble the Main Board into the aluminum case bottom
<br clear=all>
<br clear=all>
[[File:IMG_4226_fixed_wiki.JPG|600px|right]]
[[File:build51_mainboard_rpi5.jpg|600px|right]]
'''5.''' Plug the RBPi5 (with the thermal block attached) on the Main Board's RBPi socket, the big one with 2 rows of 20 pin-holes each. Pay attention to not bend any pins. Also note that the display flat cable should pass through the rectangular hole in the main board, as seen in the photos (zoom in if you have doubts).
'''5.''' Plug the RBPi5 (with the thermal block attached) on the Main Board's RBPi socket, the big one with 2 rows of 20 pin-holes each. Pay attention to not bend any pins. Also note that the display flat cable should pass through the rectangular hole in the main board, as seen in the photos (zoom in if you have doubts).
<br clear=all>
<br clear=all>
[[File:IMG_4195_fixed_wiki.JPG|600px|right]]
[[File:build51_mainboard_rpi5_bottom_secured.jpg|600px|right]]
'''6.''' Fix the thermal block to the main board from the backside using the 4 x M2.5 screws.
'''6.''' Fix the thermal block to the main board from the backside using the 4 x M2.5 screws.