And finally, connect the ribbon's 26-pin connector to the display's connector. '''Put attention to the orientation'''. The red wire should be the pin 1 that as marked in the display's PCB surface.
+
connect the ribbon's 26-pin connector to the display's connector. '''Pay attention to the orientation'''. The red wire should be the pin 1, which as marked on the display's PCB surface.
[[File:Screen&Ribbon.JPG|600px]]
[[File:Screen&Ribbon.JPG|600px]]
−
At this point, your Zynthian Box should look something like this:
+
At this point, your Zynthian Box should look like this:
[[File:Precierre.JPG|600px]]
[[File:Precierre.JPG|600px]]
−
=== Building and Testing the Official Kit V3, by Sébastien Marty ===
=== Building and Testing the Official Kit V3, by Sébastien Marty ===