88
edits
Changes
Jump to navigation
Jump to search
Line 186:
Line 186: − + − + − For fixing the display to the case cover, you have to use this set:+ − − It's composed of 4 bolts, 4 nuts and 4 nylon separators. Before securing the screen, don't forget to remove the protective plastic sheet. For tightening the bolts you could use a 2mm Allen key while hold the nut with your fingers.
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 11:09, 13 January 2020
, 11:09, 13 January 2020→Secure the Display
The zynaptik board has some extra circuitry which doesn't have anything soldered on it. These are used for modifying the board, and it is fully functional as it is.
The zynaptik board has some extra circuitry which doesn't have anything soldered on it. These are used for modifying the board, and it is fully functional as it is.
===Secure the Display===
===Mount the Display===
{{WarningBox|Please, handle electronic parts with care, specially the display, as it's easy to damage.}}
{{WarningBox|Please, handle electronic parts with care, specially the display, as it is easily damaged.}}
The screen is secured with these 4 screws, nuts, and nylon separators. Mount the screen by screwing the screws from the outside and fixing them with the bolts from the inside. The separators go between the screen and the case. Remember to remove the protective film from the screen before mounting it.
[[File:IMG_1295.JPG|400px]]
[[File:IMG_1295.JPG|400px]]
[[File:IMG_2423.JPG|600px]]
[[File:IMG_2423.JPG|600px]]