Changes

===Mount the MIDI activity LEDS===

===Mount the MIDI activity LEDS===

Insert the 3 LEDS in the case holes, leaving the short lead at left. And don't push the LED's head! Instead push the black plastic holder around the LED. Sometimes is hard to push ...

Insert the 3 LEDS in the case holes, leaving the short lead at left. Don't push the LED's head! Instead push the black plastic holder around the LED. Sometimes is hard to push ...

[[File:IMG2403.JPG|600px]]

[[File:IMG2403.JPG|600px]]

When it's done, you have to plug the LED wires into the 2 spare "DUPONT" wires from the MIDI harness (green & yellow ones). Polarity is important, so don't cross the wires:

When it's done, you have to plug the LED wires into the 2 spare "DUPONT" connectors from the MIDI harness (green & yellow wires). Polarity is important, so don't cross the wires:

  * JST Green wire (1) => LED's Anode (LED's long lead)

  * JST Green wire (1) => LED's Anode (LED's long lead)

  * JST Yellow wire (2) => LED's Cathode (LED's short lead)

  * JST Yellow wire (2) => LED's Cathode (LED's short lead)

As the LED's leads are too long, you should cut them a little bit (7-8 mm is a good length), but remember where the "short" lead is located!!

As the LED's leads are too long, you would like to cut them a little bit (7-8 mm is a good length), but remember where the "short" lead is located!!

[[File:IMG2406.JPG|600px]]

[[File:IMG2406.JPG|600px]]