2,708
edits
Changes
Jump to navigation
Jump to search
Line 288:
Line 288: − + − + − we need to configure the software for working with your kit v3. The simplest way is using the webconf tool:+ − + −
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 15:25, 15 July 2019
, 15:25, 15 July 2019→First Boot
[[file:IMG_1562.JPG|600px]]
[[file:IMG_1562.JPG|600px]]
If not, bad luck! Probably you made some mistake during the mounting process. You have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you don't get an error screen or a blank screen, bad luck! Probably you made some mistake during the mounting process. You have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you are using the Aruk RC-3 SD image, you will note that the controllers are not working at all. This SD image is pre-configured for the kit v2, so
If you are using the Aruk RC-3 SD image, you will note that the controllers are not working at all. This SD image is pre-configured for working with the kit v2, so
you need to configure the software for working with your kit v3. The simplest way is using the webconf tool:
* Connect your zynthian to your local network using an ethernet cable (RJ-45).
* Connect your zynthian to your local network using an ethernet cable (RJ-45).
* From your web browser, access the zynthian's webconf tool by typing "zynthian.local" in the address bar.
* From your web browser, access the zynthian's webconf tool by typing "zynthian.local" in the address bar.
* If this doesn't work for you, you should try with the IP. You can get the IP of your zynthian by navigating to the Admin Menu and clicking "Network Info". You should do that by using the "touch" interface: Click the top bar with a stick (or your nail, if it's not too wide) until you are in the Admin Menu. Once you are there, go down and click "Network Info".
* If this doesn't work for you, you should try with the IP. You can get the IP of your zynthian by navigating to the Admin Menu and clicking "Network Info". You should do that by using the "touch" interface: Click the top bar with a stick (or your nail, if it's not too wide) until you are in the Admin Menu. Once you are there, go down and click "Network Info".
===Test the Controllers===
===Test the Controllers===