240
edits
Changes
Jump to navigation
Jump to search
Line 276:
Line 276: − +
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 16:36, 11 July 2019
, 16:36, 11 July 2019→First Boot
If not, bad luck! Probably you made some mistake during the mounting process. You have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If not, bad luck! Probably you made some mistake during the mounting process. You have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you are using an older SD image that is not pre-configure for the Kit v2, then you should configure your Zynthian Box's hardware using the [[Configuration_Users_Guide|webconf tool]]. These are the adjustments you have to do:
If you are using an older SD image that is not pre-configure for the Kit v3, then you should configure your Zynthian Box's hardware using the [[Configuration_Users_Guide|webconf tool]]. These are the adjustments you have to do:
* '''Display:''' PiScreen 3.5 (v2)
* '''Display:''' PiScreen 3.5 (v2)