2,706
edits
Changes
Jump to navigation
Jump to search
Line 45:
Line 45: − + Line 51:
Line 51: − +
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 16:38, 2 June 2020
, 16:38, 2 June 2020→Zynthian Software
The easiest way of getting the software is downloading the last ''official'' SD image from here:
The easiest way of getting the software is downloading the last ''official'' SD image from here:
'''[https://os.zynthian.org/2019-06-26-zynthianos-stretch-lite-1.0.0-RC3.zip Download Zynthian "Aruk RC-3" SD-image]'''
'''[https://os.zynthian.org/2020-05-27-zynthianos-buster-lite-1.0.0-RC2.zip Download Zynthian "Buster RC-2" SD-image]'''
It's a 16GB compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3.
It's a 16GB compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3.
These SD card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
These SD card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
After downloading the SD-image, you have to write it to your SD card. You need a SD card with a minimum size of 16GB.
After downloading the SD-image, you have to write it to your SD card. You need a '''micro-SD card with a minimum size of 16GB'''.
If you don't know how to do it, you can use [https://etcher.io/ Etcher] (free software, works on Mac, Windows or Linux) to flash the image onto the SD card. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].
If you don't know how to do it, you can use [https://etcher.io/ Etcher] (free software, works on Mac, Windows or Linux) to flash the image onto the SD card. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].