Changes

In this section i will try to give you some tips for locating and solving the problems you may have.

In this section i will try to give you some tips for locating and solving the problems you may have.

For finding and solving problems, i really recommend to connect a HDMI display to the RBPi. It will give you accurate information during the booting sequence. Also, if you connect an USB keyboard, you could login into the system and get extra information, inspect the logs, etc.

For finding and solving problems, I really recommend connecting a HDMI display to the Raspberry Pi. This will show you all information during the boot process. If you connect a USB keyboard to the Pi, you can login into the system and get extra information, inspect the logs, etc.

===The display don't show the zynthian splash screen on boot===

===The display don't show the zynthian splash screen on boot===

In that case, probably the system is not booting correctly. You could try to connect a HDMI display and see if the system is booting. If you can't see the booting sequence, then you should re-burn your SD-card with the Zynthian image. Also, check that your image file is correct by using the SHA1 signature.

In that case, probably the system is not booting correctly. You could try to connect a HDMI display and see if the system is booting. If you can't see the boot sequence, then you should re-flash your SD-card with the Zynthian image. Also check that your image file is correct by using the SHA1 signature.

===You get the zynthian error screen with the IP===

===You get the zynthian error screen with the IP===

Your hardware seems to be incorrectly configured. You should access the webconf tool and configure your hardware.

Your hardware seems to be configured incorrectly. You should access the webconf tool and configure your hardware.

===Your controllers doesn't work===

===Your controllers doesn't work===

You make a mistake while connecting the controllers or your hardware (wiring layout) is incorrectly configured. You should access the webconf tool and configure your hardware.

You made a mistake while connecting the controllers, or your hardware (wiring layout) is incorrectly configured. You should access the webconf tool and configure your hardware.

===You can't solve the problem===

===You can't solve the problem===

  https://discourse.zynthian.org

  https://discourse.zynthian.org

Also, if you found a solution for a problem not described here, please send feedback to the community, or better, edit this wiki! ;-)

Also, if you found a solution for a problem not described here, please send feedback to the community so others can see how you solved the problem

=Technical Reference=

=Technical Reference=