Changes

{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short jumpers JP1 & JP2 in the zynaptik board.}}

{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short jumpers JP1 & JP2 in the zynaptik board.}}

===Connect the Audio Jack connectors===

===Connect the Audio Output Jack connectors===

Connect the audio output jack connectors to the audio-output header on the Hifiberry soundcard:

Connect the audio output jack connectors to the audio-output header on the Hifiberry soundcard:

{{NoteBox|Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.}}

{{NoteBox|Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.}}

Connect the balanced audio input jack connector to the audio-input header on the Hifiberry soundcard:

 

 

 

Connect the audio input jack connector to the audio-input header on the soundcard using the 3-pin Dupont connector:

[[File:dacplus-adc-top audio-in.jpg|600px]]

[[File:dacplus-adc-top audio-in.jpg|600px]]

   

   

   

   

{{WarningBox|Due to hardware problems, Hifiberry has recently changed (September 2019) the specification of the DAC+ADC. It seems that the Balanced Audio input doesn't work like expected and it works like a simple not-Balanced input. You can read more about this subject on [https://discourse.zynthian.org/t/new-official-kit-v2-audio-input-is-here/3013/25 this forum thread].

{{WarningBox|Due to hardware problems, Hifiberry has recently changed (September 2019) [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc the specification of the DAC+ADC]. It seems that the Balanced Audio input doesn't work like expected and it works like a simple not-Balanced input. You can read more about this subject on [https://discourse.zynthian.org/t/new-official-kit-v2-audio-input-is-here/3013/25 this forum thread].

<br>

<br>

So, for taking profit of the stereo connector that should be a mono balanced input but it's not balanced at all, you better get a stereo unbalanced input by connecting both audio channels to the connector. The problem is that the 3 wires Dupont connector included in official kit doesn't allow to do it easily. You have to cut the second wire (red or white) and solder a single Dupont connector, connecting it to the pin 5 on the Hifiberry. Please, check the [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc/ Hifiberry DAC+ADC specification]}}

So, for taking profit of the stereo connector that should be a mono balanced input but it's not balanced at all, you better get a stereo unbalanced input by connecting both audio channels to the connector. The problem is that the 3-wires Dupont connector included in official kit doesn't allow to do it easily. You have to cut the second wire (red or white) and solder a single Dupont connector, connecting it to the pin 5 on the Hifiberry. Please, check the [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc/ Hifiberry DAC+ADC specification]}}

 

 

 

 

===Connect the Display===

===Connect the Display===