2,706
edits
Changes
Jump to navigation
Jump to search
Line 147:
Line 147: + + Line 193:
Line 195: − + Line 203:
Line 205: − + Line 238:
Line 240: + + Line 247:
Line 251: + + Line 256:
Line 262: + +
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 00:25, 2 November 2019
, 00:25, 2 November 2019→Mount the MIDI activity LEDS
[[File:IMG2406.JPG|600px]]
[[File:IMG2406.JPG|600px]]
{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short jumpers JP1 & JP2 in the zynaptik board.}}
===Assemble the Main Computing Block===
===Assemble the Main Computing Block===
[[File:IMG_1295.JPG|400px]]
[[File:IMG_1295.JPG|400px]]
It's composed of 4 bolts, 4 nuts and 4 nylon separators. Before fixing the screen, don't forget to remove the protective plastic sheet.
It's composed of 4 bolts, 4 nuts and 4 nylon separators. Before securing the screen, don't forget to remove the protective plastic sheet. For tightening the bolts you could use a 2mm Allen key while hold the nut with your fingers.
[[File:IMG_2423.JPG|600px]]
[[File:IMG_2423.JPG|600px]]
[[File:Rotary&wire.JPG|600px]]
[[File:Rotary&wire.JPG|600px]]
Fix the 4 controller modules to the case cover using the 4 bolts and washers attached to every rotary encoder.
Fix the 4 controller modules to the case cover using the 4 nuts and washers attached to every rotary encoder.
[[File:ZynScreen&Controller.JPG|600px]]
[[File:ZynScreen&Controller.JPG|600px]]
[[File:MIDIConnector.JPG|600px]]
[[File:MIDIConnector.JPG|600px]]
{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short jumpers JP1 & JP2 in the zynaptik board.}}
The black wire on the "R" pin, white on the "L" one and red on "GND" (middle).
The black wire on the "R" pin, white on the "L" one and red on "GND" (middle).
{{NoteBox|Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.}}
The black wire should be connected to pin 3, red wire to pin 2 and white wire to pin 1. Looking at the first photo, numbering is left to right.
The black wire should be connected to pin 3, red wire to pin 2 and white wire to pin 1. Looking at the first photo, numbering is left to right.
{{NoteBox|Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.}}
===Connect the Display===
===Connect the Display===