2,706
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + Line 99:
Line 99: + + + + + Line 259:
Line 264: + + + + + Line 428:
Line 438: − + − + − − '''More coming soon ...''' Line 450:
Line 458: − You can find all this info and much more in the project's [https://github.com/zynthian/zynthian-hw Hardware Repository].+ − ===Electrical Schematic===+ − This is the electrical scheme of the All-In-One circuit:+ − + − − ===RBPi GPIO=== − − [[File:Raspberry-Pi-j8header-2b.png|400px]]
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 15:29, 5 September 2019
, 15:29, 5 September 2019→Technical Reference
[http://shop.zynthian.org Zynthian Shop]
[http://shop.zynthian.org Zynthian Shop]
Specifically, the instructions are for the assembly of kits v3 (version 3), those using the Zynaptik circuit and the ZynScreen v1.4 display.
Specifically, these instructions are for assembling kit v3 (version 3), those kits using the Zynaptik circuit and the ZynScreen v1.4 display.
[[File:IMG_2379.JPG|600px]]
[[File:IMG_2379.JPG|600px]]
[[File:IMG_2384.JPG|600px]]
[[File:IMG_2384.JPG|600px]]
==== Unboxing the Official Kit V3, by Sébastien Marty ====
<embedvideo service="youtube">https://www.youtube.com/watch?v=dFTSyUoUUTQ</embedvideo>
=Assembling your Zynthian Box=
=Assembling your Zynthian Box=
[[File:Precierre.JPG|600px]]
[[File:Precierre.JPG|600px]]
=== Building and Testing the Official Kit V3, by Sébastien Marty ===
<embedvideo service="youtube">https://www.youtube.com/watch?v=e5gpAZL8kiE</embedvideo>
=Testing your Zynthian Box=
=Testing your Zynthian Box=
In that case, probably the system is not booting correctly. You could try to connect a HDMI display and see if the system is booting. If you can't see the booting sequence, then you should re-burn your SD-card with the Zynthian image. Also, check that your image file is correct by using the SHA1 signature.
In that case, probably the system is not booting correctly. You could try to connect a HDMI display and see if the system is booting. If you can't see the booting sequence, then you should re-burn your SD-card with the Zynthian image. Also, check that your image file is correct by using the SHA1 signature.
===You get the zynthian error screen with the IP==
===You get the zynthian error screen with the IP===
Your hardware seems to be incorrectly configured. You should access the webconf tool and configure your hardware.
Your hardware seems to be incorrectly configured. You should access the webconf tool and configure your hardware.
==Your controllers doesn't work==
===Your controllers doesn't work===
You make a mistake while connecting the controllers or your hardware (wiring layout) is incorrectly configured. You should access the webconf tool and configure your hardware.
You make a mistake while connecting the controllers or your hardware (wiring layout) is incorrectly configured. You should access the webconf tool and configure your hardware.
===You can't solve the problem===
===You can't solve the problem===
Finally, i have included here some detailed schemes. People hacking the standard Zynthian design would find it very useful. Also, if you have some problem and need to "debug", you would find it useful too.
Finally, i have included here some detailed schemes. People hacking the standard Zynthian design would find it very useful. Also, if you have some problem and need to "debug", you would find it useful too.
[[File:Zynthian_controller_single2_smd.svg|600px]]
[[File:Zynthian_zynaptik.svg|600px]]
[[File:ZynScreen_v1.3.svg|600px]]
[[File:Zynthian_allinone.sch.svg|800px]]
You can find all this info and much more in the project's [https://github.com/zynthian/zynthian-hw Hardware Repository].