2,705
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + Line 99:
Line 99: + + + + + Line 259:
Line 264: + + + + + Line 410:
Line 420: − + − + − - '''restart GUI''' (or '''reboot''') from the admin menu+ Line 422:
Line 432: − + − + − I recommend you disconnect the controller and 2in1 modules and try to boot again.+ − − + − In that case, probably the system is not booting correctly. You could try to connect a HDMI display and see if the system is booting. If you can't see the booting sequence, then you should re-burn your SD-card with the Zynthian image. Also, check that your image file is correct by using the SHA1 signature.+ + + − '''More coming soon ...'''+ Line 447:
Line 458: − You can find all this info and much more in the project's [https://github.com/zynthian/zynthian-hw Hardware Repository].+ − − ===Electrical Schematic=== − This is the electrical scheme of the All-In-One circuit:+ − + − ===RBPi GPIO===+ − −
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 15:29, 5 September 2019
, 15:29, 5 September 2019→Technical Reference
[http://shop.zynthian.org Zynthian Shop]
[http://shop.zynthian.org Zynthian Shop]
Specifically, the instructions are for the assembly of kits v3 (version 3), those using the Zynaptik circuit and the ZynScreen v1.4 display.
Specifically, these instructions are for assembling kit v3 (version 3), those kits using the Zynaptik circuit and the ZynScreen v1.4 display.
[[File:IMG_2379.JPG|600px]]
[[File:IMG_2379.JPG|600px]]
[[File:IMG_2384.JPG|600px]]
[[File:IMG_2384.JPG|600px]]
==== Unboxing the Official Kit V3, by Sébastien Marty ====
<embedvideo service="youtube">https://www.youtube.com/watch?v=dFTSyUoUUTQ</embedvideo>
=Assembling your Zynthian Box=
=Assembling your Zynthian Box=
[[File:Precierre.JPG|600px]]
[[File:Precierre.JPG|600px]]
=== Building and Testing the Official Kit V3, by Sébastien Marty ===
<embedvideo service="youtube">https://www.youtube.com/watch?v=e5gpAZL8kiE</embedvideo>
=Testing your Zynthian Box=
=Testing your Zynthian Box=
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and having the controllers working OK is update the software:
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and having the controllers working OK is update the software:
- connect the Zynthian Box to your router using a RJ45 cable
- connect your Zynthian Box to your router using an ethernet cable
- '''update zynthian software''' from the admin menu
- from the admin menu, click '''update software'''
- from the admin menu, click '''restart UI''' (or '''reboot''')
The update process can take some time. Be patient. If you get some ERROR message while updating, please, [https://discourse.zynthian.org/t/problems-updating-the-software-from-the-admin-menu/386 ask in the forum]. You can send a photo or description of the error message.
The update process can take some time. Be patient. If you get some ERROR message while updating, please, [https://discourse.zynthian.org/t/problems-updating-the-software-from-the-admin-menu/386 ask in the forum]. You can send a photo or description of the error message.
In this section i will try to give you some tips for locating and solving the problems you may have.
In this section i will try to give you some tips for locating and solving the problems you may have.
For finding and solving problems, i really recommend to connect a HDMI display to the RBPi. It will give you accurate information during the booting sequence. Also, if you connect a USB keyboard, you can login into the system and get extra information, inspect the logs, etc.
For finding and solving problems, i really recommend to connect a HDMI display to the RBPi. It will give you accurate information during the booting sequence. Also, if you connect an USB keyboard, you could login into the system and get extra information, inspect the logs, etc.
===The display don't go white in the boot stage 1===
===The display don't show the zynthian splash screen on boot===
In that case, probably the system is not booting correctly. You could try to connect a HDMI display and see if the system is booting. If you can't see the booting sequence, then you should re-burn your SD-card with the Zynthian image. Also, check that your image file is correct by using the SHA1 signature.
If the problem persist it's very probable you haven't solder correctly the side 26-pin connector. You should double check the connector and be sure that it's correctly soldered.
===The display don't show the zynthian splash screen in the boot stage 2===
===You get the zynthian error screen with the IP===
Your hardware seems to be incorrectly configured. You should access the webconf tool and configure your hardware.
===Your controllers doesn't work===
You make a mistake while connecting the controllers or your hardware (wiring layout) is incorrectly configured. You should access the webconf tool and configure your hardware.
===You can't solve the problem===
===You can't solve the problem===
Finally, i have included here some detailed schemes. People hacking the standard Zynthian design would find it very useful. Also, if you have some problem and need to "debug", you would find it useful too.
Finally, i have included here some detailed schemes. People hacking the standard Zynthian design would find it very useful. Also, if you have some problem and need to "debug", you would find it useful too.
[[File:Zynthian_controller_single2_smd.svg|600px]]
[[File:Zynthian_zynaptik.svg|600px]]
[[File:Zynthian_allinone.sch.svg|800px]]
[[File:ZynScreen_v1.3.svg|600px]]
You can find all this info and much more in the project's [https://github.com/zynthian/zynthian-hw Hardware Repository].
[[File:Raspberry-Pi-j8header-2b.png|400px]]