2,705
edits
Changes
Jump to navigation
Jump to search
Line 294:
Line 294: − + − * If this doesn't work for you, you should try with the IP. You can get the IP of your zynthian by navigating to the Admin Menu and clicking "Network Info". You should do that by using the "touch" interface: Click the top bar with a stick (or your nail, if it's not too wide) until you are in the Admin Menu. Once you are there, go down and click "Network Info".+ + +
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 17:23, 16 July 2019
, 17:23, 16 July 2019→First Boot
* Connect your zynthian to your local network using an ethernet cable (RJ-45).
* Connect your zynthian to your local network using an ethernet cable (RJ-45).
* From your web browser, access the zynthian's webconf tool by typing "zynthian.local" in the address bar.
* From your web browser, access the zynthian's webconf tool by typing "zynthian.local" in the address bar. If this doesn't work for you, you should try with the IP. You can get the IP of your zynthian by navigating to the Admin Menu and clicking "Network Info". You should do that by using the "touch" interface: Click the top bar with a stick (or your nail, if it's not too wide) until you are in the Admin Menu. Once you are there, go down and click "Network Info".
* Type the password (''raspberry'') for login into the webconf tool.
* Once you are logged in, you have to access Hardware->Kit and select "Kit V3".
* Save the changes and reboot your Zynthian.
===Test the Controllers===
===Test the Controllers===