2,706
edits
Changes
Jump to navigation
Jump to search
Line 363:
Line 363: − + − +
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 15:21, 15 July 2019
, 15:21, 15 July 2019→Test the MIDI-IN connector
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and instrument
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and instrument.
3. Connect your keyboard's MIDI-OUT to the Zynthian's MIDI-IN using a MIDI cable. The keyboard should be configured to use channel #1.
3. Connect your keyboard's MIDI-OUT to the Zynthian's MIDI-IN using a MIDI cable.
3. After 2-3 seconds, play something with your keyboard. OK! A single melody can do the task. You should hear your song ;-)
3. After 2-3 seconds, play something with your keyboard. OK! A single melody can do the task. You should hear your song ;-)