2,705
edits
Changes
Jump to navigation
Jump to search
Line 206:
Line 206: − + + − [[File:Ribbon&Hifi&Zynaptik.JPG|600px]] − + − + + − * Connect the Jack connector to the auxiliar audio-out connector on the HifiBerry soundcard. It's the 3-pin JST connector: − + + + − + + + + + + + + + − +
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 12:59, 15 July 2019
, 12:59, 15 July 2019→Connecting everything
The Zynthian Kit 3 is designed to use JST connectors, so connecting everything is really straight-forward:
The Zynthian Kit 3 is designed to use JST connectors, so connecting everything is really straight-forward:
* Connect the Main Ribbon Bus cable to the RBPi's 40-pin header and also to the Zynaptik module
* Connect the Main Ribbon Bus cable to the RBPi's 40-pin header and also to the Zynaptik module. The red wire is pin 1, so if you are looking at the case from the front side, it should be at right.
[[File:Ribbon.jpeg|600px]]
[[File:Ribbon.jpeg|600px]]
[[File:Ribbon&Hifi&Zynaptik.JPG|600px]]
* Connect the 4 double JST cables to the 4 controller connectors on the ZynScreen (CTRL1, CTRL2, CTRL3, CTRL4)
* Connect the 4 controller cables to the 4 controller connectors on the ZynScreen (CTRL1, CTRL2, CTRL3, CTRL4)
[[File:ZynScreenConnect.JPG|600px]]
[[File:ZynScreenConnect.JPG|600px]]
* Connect the 3 JST cables from the MIDI connectors to the MIDI-IN, MIDI-OUT and MIDI-THRU connectors on the Zynaptik module.
* Connect the 3 cables from the MIDI connectors to the MIDI-IN, MIDI-OUT and MIDI-THRU connectors on the Zynaptik module.
[[File:MIDIConnector.JPG|600px]]
[[File:MIDIConnector.JPG|600px]]
[[File:IMG_2413.JPG|600px]]
* Connect the audio output jack connectors to the audio-output header on the Hifiberry soundcard:
[[File:dacplus-adc-top audio-out.jpg|600px]]
[[File:IMG_2414.JPG|600px]]
[[File:IMG_2414.JPG|600px]]
[[File:IMG_2415.JPG|600px]]
The black wire on the "R" pin, white on the "L" one and red on "GND" (middle).
* Connect the balanced audio input jack connector to the audio-input header on the Hifiberry soundcard:
[[File:dacplus-adc-top audio-in.jpg|600px]]
[[File:IMG_2416.JPG|600px]]
[[File:IMG_2416.JPG|600px]]
The black wire should be connected to pin 3, red wire to pin 2 and white wire to pin 1. Looking at the first photo, numbering is left to right.
===Connect the Display===
===Connect the Display===
And finally, connect the ribbon's 26-pin connector to the Display's male side connector. '''Put attention to the orientation'''. The red wire should be the pin 1 that as marked in the display's PCB surface.
And finally, connect the ribbon's 26-pin connector to the display's connector. '''Put attention to the orientation'''. The red wire should be the pin 1 that as marked in the display's PCB surface.
[[File:Screen&Ribbon.JPG|600px]]
[[File:Screen&Ribbon.JPG|600px]]