It's a 16GB compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3.
+
It's a 8 GB compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3.
−
These SD card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
+
These SD-card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
−
After downloading the SD-image, you have to write it to your SD card. You need a '''micro-SD card with a minimum size of 16GB'''.
+
After downloading the SD-image, you have to write it to your micro-SD card. You need a '''micro-SD card with a minimum size of 16 GB'''.
−
If you don't know how to do it, you can use [https://etcher.io/ Etcher] (free software, works on Mac, Windows or Linux) to flash the image onto the SD card. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].
+
If you don't know how to do it, you can use [https://etcher.io/ Etcher] (free software, works on Mac, Windows or Linux) to flash the image onto the micro-SD card. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].
you can also build your own SD image following these instructions:
you can also build your own SD image following these instructions: