If you don't know how to do it, you can use [https://etcher.io/ Etcher] (free software, works on Mac, Windows or Linux) to flash the image onto the SD card. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link]. | If you don't know how to do it, you can use [https://etcher.io/ Etcher] (free software, works on Mac, Windows or Linux) to flash the image onto the SD card. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link]. |