Changes

=Connecting everything=

=Connecting everything=

The Zynthian Kit 3 is designed to use JST connectors that can't be plugged reversed, so connecting everything is really straight-forward:

The Zynthian Kit 3 is designed to use JST connectors which can't be plugged in wrong, so connecting everything is straight-forward:

===Connect the Ribbon Bus cable===

===Connect the Ribbon Bus cable===

Connect the Main Ribbon Bus cable to the RBPi's 40-pin header and also to the Zynaptik module. The red wire is pin 1, so if you are looking at the case from the front side, it should be at right.

Connect the Main Ribbon Bus cable to the Raspberry Pi's 40-pin header and to the Zynaptik module. The red wire is pin 1, so if you are looking at the case from the front, it should be on the right.

[[File:Ribbon.jpeg|600px]]

[[File:Ribbon.jpeg|600px]]

[[File:MIDIConnector.JPG|600px]]

[[File:MIDIConnector.JPG|600px]]

{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short jumpers JP1 & JP2 in the zynaptik board.}}

{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short the JP1 & JP2 jumpers on the zynaptik board.}}

===Connect the Audio Output Jack connectors===

===Connect the Audio Output Jack connectors===