2,705
edits
Changes
Jump to navigation
Jump to search
Line 480:
Line 480: − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 10:53, 24 October 2017
, 10:53, 24 October 2017→Test the MIDI-USB inputs
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and instrument
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and instrument
3. Connect a MIDI-USB keyboard to any USB port. The keyboard should be configured to use channel #1.
3. Connect a MIDI-USB keyboard to any USB port. The keyboard should be configured to use channel #1.
3. After 2-3 seconds , play something with your keyboard. A simple ''Chopin's Nocturni'' would be enough. You should hear your music. If you don't like it, then probably you have to take some piano lessons, like me ;-)
3. After 2-3 seconds , play something with your keyboard. A simple ''Chopin's Nocturni'' would be enough. You should hear your music. If you don't like it, probably you should take some piano lessons, same as me ;-)
If this doesn't work, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If this doesn't work, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].