2,705
edits
Changes
Jump to navigation
Jump to search
Line 467:
Line 467: − + + − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 10:51, 24 October 2017
, 10:51, 24 October 2017→Test the MIDI subsystem
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian, select FluidSynth engine, channel #1 and 'FluidR3 GM' bank.
2. Boot your Zynthian, select FluidSynth engine, channel #1 and 'FluidR3 GM' bank. Select some instrument.
3. You could add more layers for completing the band ;-)
3. Push BACK, holding the switch pushed more than 2 seconds. You should get into the 'Admin' screen.
3. Push BACK, holding the switch pushed more than 2 seconds. You should get into the 'Admin' screen.
4. Select 'MIDI Test' option and push 'SELECT'. You should hear the test midi-track: a 'Take Five' version ;-)
4. Select 'MIDI Test' option and push 'SELECT'. You should hear the test midi-track ('Take Five') interpreted by your Zynthian's band ;-)
5. Push 'BACK' to stop the playing
5. Push 'BACK' to stop the playing