2,706
edits
Changes
Jump to navigation
Jump to search
Line 457:
Line 457: − + − + − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 10:48, 24 October 2017
, 10:48, 24 October 2017→Test the Audio Output
1. Connect the audio output (RCA or Jack connectors) to your amplifier or auto-amplified speakers.
1. Connect the audio output (RCA or Jack connectors) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian. You should be in the initial 'Load Snapshot' screen.
2. Boot your Zynthian. You should be in the initial 'Layer Selection' screen.
3. Push BACK twice to get into the 'Admin' screen.
3. Push BACK and you will get into the 'Admin' screen.
4. Select 'Audio Test' option and push 'SELECT'. You should hear the test audio-track: a nice afrocuban stuff ;-)
4. Select 'Audio Test' option and push 'SELECT'. You should hear the test audio-track: a nice afrocuban stuff ;-)
5. Push 'BACK' to stop the playing
5. Push 'BACK' to stop the playing, and 'BACK' again to return to the "Layer Selection' screen.
If you hear nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you hear nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].