2,705
edits
Changes
Jump to navigation
Jump to search
Line 438:
Line 438: − + Line 452:
Line 452: − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 10:47, 24 October 2017
, 10:47, 24 October 2017→Testing your Zynthian Box
The selector must go down when rotating clockwise and go up when rotating counterclockwise. If the rotation sense is reversed, you should check the wiring.
The selector must go down when rotating clockwise and go up when rotating counterclockwise. If the rotation sense is reversed, you should check the wiring.
3. Select the ZynAddSubFX engine, select channel #1, bank and instrument. You should get into the 'Instrument Control' screen:
3. Select the ZynAddSubFX engine, select channel #1, bank and instrument. You should get into the 'Instrument Control' screen.
'''CAPTURE NEEDED HERE'''
'''CAPTURE NEEDED HERE'''
7. From the "Instrument Control" screen, push 'Snapshot' to get into the 'Load Snapshot' screen. Push 'Snapshot' again to 'Save Snapshot'. Push 'BACK' to return to the 'Instrument Control' screen.
7. From the "Instrument Control" screen, push 'Snapshot' to get into the 'Load Snapshot' screen. Push 'Snapshot' again to 'Save Snapshot'. Push 'BACK' to return to the 'Instrument Control' screen.
If everything is working OK, then you should read the [[Zynthian_Users_Guide User's|Guide]] and start enjoying your Zynthian Box, but before that ...
If everything is working OK, then you should read the [[Zynthian_Users_Guide|User's Guide]] and start enjoying your Zynthian Box, but before that ...
===Test the Audio Output===
===Test the Audio Output===