2,705
edits
Changes
Jump to navigation
Jump to search
Line 273:
Line 273: − + − * JST Black (2) => pin 5 of MIDI connector+ − + − + +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 11:17, 29 April 2019
, 11:17, 29 April 2019→Building the MIDI-IN/OUT/THRU connectors
'''JST Connector wires'''[[File:Midiconnfront.jpg|340px|right]]
'''JST Connector wires'''[[File:Midiconnfront.jpg|340px|right]]
* JST Red (1) => pin 4 of MIDI connector
* JST White (1) => LED's Anode (LED's red wire/long lead)
* JST Yellow (3) => LED's Cathode (LED's black wire/short lead)
* JST Yellow (2) => LED's Cathode (LED's black wire/short lead)
* JST White (4) => LED's Anode (LED's red wire/long lead)
* JST Black (3) => pin 5 of MIDI connector
* JST Red (4) => pin 4 of MIDI connector
If you want (i strongly recommend you do it!), you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)
If you want (i strongly recommend you do it!), you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)