Changes

Jump to navigation Jump to search

Building a Zynthian Box using an official Kit v2 (view source)

Revision as of 15:09, 17 November 2019

457 bytes added ,  15:09, 17 November 2019
→‎Connecting everything
Line 392: Line 392:  
The new Zynthian Kit 2 is designed to use JST connectors, so connecting everything is really straight-forward:
 
The new Zynthian Kit 2 is designed to use JST connectors, so connecting everything is really straight-forward:
   −
* Connect the Main Ribbon Bus cable to the RBPi's 40-pin header and also to the All-In-One module
+
===Connect the Ribbon Bus cable===
 +
 
 +
Connect the Main Ribbon Bus cable to the RBPi's 40-pin header and also to the All-In-One module
    
[[File:IMG_4741.JPG|600px]]
 
[[File:IMG_4741.JPG|600px]]
Line 398: Line 400:  
[[File:IMG_1474.JPG|600px]]
 
[[File:IMG_1474.JPG|600px]]
   −
* Connect the 4 double JST cables to the 4 controller connectors on the All-In-One module (CTRL1, CTRL2, CTRL3, CTRL4)
+
===Connect the controllers (1)===
 +
 
 +
Connect the 4 double JST cables to the 4 controller connectors on the All-In-One module (CTRL1, CTRL2, CTRL3, CTRL4)
    
[[File:IMG_4744.JPG|600px]]
 
[[File:IMG_4744.JPG|600px]]
Line 404: Line 408:  
[[File:IMG_1479.JPG|600px]]
 
[[File:IMG_1479.JPG|600px]]
   −
* Connect the 2 JST cables from the MIDI connectors to the MIDI-IN and the MIDI-OUT/THRU connectors on the All-In-One module. Note that currently only 2 connectors are available in the official aluminum case, so you have to choose what do you prefer: MIDI-OUT or MIDI-THRU ;-)
+
===Connect the MIDI connectors & activity LEDs===
 +
 
 +
Connect the 2 JST cables from the MIDI connectors to the MIDI-IN and the MIDI-OUT/THRU connectors on the All-In-One module. Note that currently only 2 connectors are available in the official aluminum case, so you have to choose what do you prefer: MIDI-OUT or MIDI-THRU ;-)
    
[[File:IMG_1465.JPG|600px]]
 
[[File:IMG_1465.JPG|600px]]
Line 412: Line 418:  
[[File:IMG_1409.JPG|600px]]
 
[[File:IMG_1409.JPG|600px]]
   −
* Connect the 4 x Controller Modules following the right numbering: from top to bottom and from left to right.
+
===Connect the controllers (2)===
 +
 
 +
Connect the 4 x Controller Modules following the right numbering: from top to bottom and from left to right.
    
[[File:zynthian_controllers.png|600px]]
 
[[File:zynthian_controllers.png|600px]]
Line 418: Line 426:  
[[File:IMG_1412.JPG|600px]]
 
[[File:IMG_1412.JPG|600px]]
   −
* Connect the Jack connector to the auxiliar audio-out connector on the HifiBerry soundcard. It's the 3-pin JST connector that you soldered before:
+
===Connect the Audio Jack connectors===
 +
 
 +
Connect the Jack connector to the auxiliar audio-out connector on the HifiBerry soundcard. It's the 3-pin JST connector that you soldered before:
    
[[File:IMG_1489.JPG|600px]]
 
[[File:IMG_1489.JPG|600px]]
 +
 +
{{NoteBox|At this point, if you have a v2+ kit (HifiBerry DAc+ADC soundcard with audio input), you should take a look to the [http://wiki.zynthian.org/index.php/Building_a_Zynthian_Box_using_an_official_Kit_v3#Connect_the_Audio_Jack_connectors v3 kit instructions].}}
    
===Connect the Display===
 
===Connect the Display===
Retrieved from "http://wiki.zynthian.org/index.php/Special:MobileDiff/10592"

Navigation menu