2,705
edits
Changes
Jump to navigation
Jump to search
Line 10:
Line 10: − + Line 33:
Line 33: − + Line 349:
Line 349: − + − + Line 580:
Line 580: − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 15:00, 21 November 2018
, 15:00, 21 November 2018→Introduction
[[File:IMG_2287.JPG|600px]]
[[File:IMG_2287.JPG|600px]]
Anyway, the instructions are quite detailed and can be used as inspiration for building a custom Zynthian Box from scratch. Of course, you will have to be creative if you want to do it in that way ;-)
Anyway, the instructions are quite detailed and can be used as inspiration for building a custom Zynthian Box from scratch. Of course, you will have to be creative if you want to do it in such a way ;-)
[[File:IMG_2280.JPG|600px]]
[[File:IMG_2280.JPG|600px]]
The Zynthian Software stack consist of:
The Zynthian Software stack consist of:
+ '''GNU Linux Operating System:''' Raspbian Jessie (Minibian is used in the last SD images)
+ '''GNU Linux Operating System:''' Raspbian Jessie (Minibian is used in the most recent SD images)
+ '''Jack Audio Daemon'''
+ '''Jack Audio Daemon'''
+ '''MOD-HOST + MOD-UI''' software, from [http://moddevices.com ModDevices] ([https://github.com/moddevices github repositories])
+ '''MOD-HOST + MOD-UI''' software, from [http://moddevices.com ModDevices] ([https://github.com/moddevices github repositories])
When it's done, you have to solder the 2 LED wires (red/black) with the 2 spare wires on the MIDI JST harness (white/yellow). Polarity is important, so don't cross the wires:
When it's done, you have to solder the 2 LED wires (red/black) with the 2 spare wires on the MIDI JST harness (white/yellow). Polarity is important, so don't cross the wires:
* LED's red wire => JST's white wire
* JST Yellow wire (3) => LED's Cathode (LED's black wire/short lead)
* LED's black wire => JST's yellow wire
* JST White wire (4) => LED's Anode (LED's red wire/long lead)
After soldering all the 3 LEDs, you may want to protect the connection with heat shrink sleeve, adhesive tape or hot melt glue.
After soldering all the 3 LEDs, you may want to protect the connection with heat shrink sleeve, adhesive tape or hot melt glue.
If you can't find a solution for your problem, ask the community:
If you can't find a solution for your problem, ask the community:
https://discourse.zynthian.com
https://discourse.zynthian.org
Also, if you found a solution for a problem not described here, please send feedback to the community, or better, edit this wiki! ;-)
Also, if you found a solution for a problem not described here, please send feedback to the community, or better, edit this wiki! ;-)