393
edits
Changes
Jump to navigation
Jump to search
mLine 8:
Line 8: − + + + Line 31:
Line 33: − + Line 63:
Line 65: − + Line 266:
Line 268: − + + + − If you want, you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)+ + + + + − [[File:IMG_4777.JPG|600px]]+ Line 330:
Line 338: + + + + + + + + + + + + + + + + + Line 345:
Line 370: − + Line 519:
Line 544: − [[File:IMG_1617.JPG|600px]]+ − Finally, screw-drive the 8 sheet-threader bolts for securing the case, 4 each side.+ Line 555:
Line 580: − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 19:40, 14 June 2018
, 19:40, 14 June 2018→Zynthian Software
Specifically, the instructions are for the assembly of kits v2 (version 2), those using the All-In-One circuit and the PiScreen 3.5' display. If you have an older kit v1, based in the 2in1 circuit and the PiTFT 2.8' display, you better should read [[Building a Zynthian Box using an official Kit | this tutorial]].
Specifically, the instructions are for the assembly of kits v2 (version 2), those using the All-In-One circuit and the PiScreen 3.5' display. If you have an older kit v1, based in the 2in1 circuit and the PiTFT 2.8' display, you better should read [[Building a Zynthian Box using an official Kit | this tutorial]].
[[File:IMG_1459.JPG|600px]]
[[File:IMG_2287.JPG|600px]]
Anyway, the instructions are quite detailed and can be used as inspiration for building a custom Zynthian Box from scratch. Of course, you will have to be creative if you want to do it in that way ;-)
Anyway, the instructions are quite detailed and can be used as inspiration for building a custom Zynthian Box from scratch. Of course, you will have to be creative if you want to do it in that way ;-)
[[File:IMG_2280.JPG|600px]]
=Bill of Materials=
=Bill of Materials=
The Zynthian Software stack consist of:
The Zynthian Software stack consist of:
+ '''GNU Linux Operating System:''' Raspbian Jessie (Minibian is used in the last SD images)
+ '''GNU Linux Operating System:''' Raspbian Jessie (Minibian is used in the most recent SD images)
+ '''Jack Audio Daemon'''
+ '''Jack Audio Daemon'''
+ '''MOD-HOST + MOD-UI''' software, from [http://moddevices.com ModDevices] ([https://github.com/moddevices github repositories])
+ '''MOD-HOST + MOD-UI''' software, from [http://moddevices.com ModDevices] ([https://github.com/moddevices github repositories])
This is a sketch with the main blocks of the ''official'' Zynthian Box:
This is a sketch with the main blocks of the ''official'' Zynthian Box:
[[File:Zynthian_hardware_scheme.png|600px]]
[[File:Zynthian_hardware_scheme.png|800px]]
In the project's repositories you will find all the electric schemes, PCB specifications, Herber files, etc. to build your own Zynthian Box from scratch:
In the project's repositories you will find all the electric schemes, PCB specifications, Herber files, etc. to build your own Zynthian Box from scratch:
===Building the MIDI-IN/OUT/THRU connectors===
===Building the MIDI-IN/OUT/THRU connectors===
Before mounting the MIDI-IN/OUT/THRU connectors into the case we will solder the needed wires. Doing it in that way is rather more comfortable than trying to solder inside the case with all the wiring mess.
Before mounting the MIDI-IN/OUT/THRU connectors into the case we will solder the needed wires that allow connecting it to the All-In-One circuit using a JST connector. Doing it in that way is rather more comfortable than trying to solder inside the case with all the wiring mess.
[[File:IMG_4777.JPG|600px]]
'''JST Connector wires'''[[File:Midiconnfront.jpg|340px|right]]
* JST Red (1) => pin 4 of MIDI connector
* JST Black (2) => pin 5 of MIDI connector
* JST Yellow (3) => LED's Cathode (LED's black wire/short lead)
* JST White (4) => LED's Anode (LED's red wire/long lead)
If you want (i strongly recommend you do it!), you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)
[[File:IMG_1276.JPG|600px]]
[[File:IMG_1276.JPG|600px]]
[[File:IMG_1383.JPG|600px]]
[[File:IMG_1383.JPG|600px]]
===Mount the MIDI activity LEDS===
Insert the 3 LEDS in the case holes. You may want to push the LEDs with something more rigid than your finger. The screwdriver's handle could be fine.
[[File:IMG_2223.JPG|600px]]
[[File:IMG_2224.JPG|600px]]
When it's done, you have to solder the 2 LED wires (red/black) with the 2 spare wires on the MIDI JST harness (white/yellow). Polarity is important, so don't cross the wires:
* JST Yellow wire (3) => LED's Cathode (LED's black wire/short lead)
* JST White wire (4) => LED's Anode (LED's red wire/long lead)
After soldering all the 3 LEDs, you may want to protect the connection with heat shrink sleeve, adhesive tape or hot melt glue.
[[File:IMG_2226.JPG|600px]]
===Secure the Display===
===Secure the Display===
Fix the 4 controller modules to the case cover using the 4 bolts and washers attached to every rotary encoder.
Fix the 4 controller modules to the case cover using the 4 bolts and washers attached to every rotary encoder.
'''IMPORTANT:''' For avoiding problems while closing the case, i recommend to mount the controller modules with the connectors facing one another, NOT like it's shown in the photo below. I will update the photo ASAP.
'''IMPORTANT:''' For avoiding problems while closing the case, i recommend to mount the controller modules with the connectors facing one another. See the photo below.
[[File:IMG_1393.JPG|600px]]
[[File:IMG_1393.JPG|600px]]
[[File:IMG_1626.JPG|600px]]
[[File:IMG_1626.JPG|600px]]
Finally, screw-drive the 8 sheet-threader bolts for securing the case, 4 each side.
[[File:IMG_2287.JPG|600px]]
=Update your Zynthian Box=
=Update your Zynthian Box=
If you can't find a solution for your problem, ask the community:
If you can't find a solution for your problem, ask the community:
https://discourse.zynthian.com
https://discourse.zynthian.org
Also, if you found a solution for a problem not described here, please send feedback to the community, or better, edit this wiki! ;-)
Also, if you found a solution for a problem not described here, please send feedback to the community, or better, edit this wiki! ;-)