Changes

Specifically, the instructions are for the assembly of kits v2 (version 2), those using the All-In-One circuit and the PiScreen 3.5' display. If you have an older kit v1, based in the 2in1 circuit and the PiTFT 2.8' display, you better should read [[Building a Zynthian Box using an official Kit | this tutorial]].

Specifically, the instructions are for the assembly of kits v2 (version 2), those using the All-In-One circuit and the PiScreen 3.5' display. If you have an older kit v1, based in the 2in1 circuit and the PiTFT 2.8' display, you better should read [[Building a Zynthian Box using an official Kit | this tutorial]].

[[File:IMG_1459.JPG|600px]]

[[File:IMG_2287.JPG|600px]]

Anyway, the instructions are quite detailed and can be used as inspiration for building a custom Zynthian Box from scratch. Of course, you will have to be creative if you want to do it in that way ;-)

Anyway, the instructions are quite detailed and can be used as inspiration for building a custom Zynthian Box from scratch. Of course, you will have to be creative if you want to do it in that way ;-)

=Bill of Materials=

=Bill of Materials=

This is a sketch with the main blocks of the ''official'' Zynthian Box:

This is a sketch with the main blocks of the ''official'' Zynthian Box:

[[File:Zynthian_hardware_scheme.png|600px]]

[[File:Zynthian_hardware_scheme.png|800px]]

In the project's repositories you will find all the electric schemes, PCB specifications, Herber files, etc. to build your own Zynthian Box from scratch:

In the project's repositories you will find all the electric schemes, PCB specifications, Herber files, etc. to build your own Zynthian Box from scratch:

Before mounting the MIDI-IN/OUT/THRU connectors into the case we will solder the needed wires. Doing it in that way is rather more comfortable than trying to solder inside the case with all the wiring mess.

Before mounting the MIDI-IN/OUT/THRU connectors into the case we will solder the needed wires. Doing it in that way is rather more comfortable than trying to solder inside the case with all the wiring mess.

If you want, you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)

If you want, you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)

[[File:IMG_1276.JPG|600px]]

[[File:IMG_1276.JPG|600px]]

[[File:IMG_1626.JPG|600px]]

[[File:IMG_1626.JPG|600px]]

[[File:IMG_1617.JPG|600px]]

Finally, screw-drive the 8 sheet-threader bolts for securing the case, 4 each side.

Finally, screw-drive the 8 sheet-threader bolts for securing the case, 4 each side.

[[File:IMG_2287.JPG|600px]]

=Update your Zynthian Box=

=Update your Zynthian Box=