2,706
edits
Changes
Jump to navigation
Jump to search
Line 412:
Line 412: − These are the stages that you should see while booting:+ Line 425:
Line 425: + + + + + + +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 11:05, 24 October 2017
, 11:05, 24 October 2017→First Boot
2. Plug the mini-usb power conector. A good 5V micro-usb charger is recommended (> 2 Amp).
2. Plug the mini-usb power conector. A good 5V micro-usb charger is recommended (> 2 Amp).
If you are using a SD image pre-configured for the Zynthian Kits v2, these are the stages that you should see while booting:
1. Initially, the display must go white
1. Initially, the display must go white
If not, bad luck! Probably you made some mistake during the mounting process. You have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If not, bad luck! Probably you made some mistake during the mounting process. You have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you are using an older SD image that is not pre-configure for the Kit v2, then you should configure your Zynthian Box's hardware using the [[Configuration_Users_Guide|webconf tool]]. These are the adjustments you have to do:
* '''Display:''' PiScreen 3.5 (v2)
* '''Audio:''' HifiBerry DAC+
* '''Wiring:''' MCP23017_ENCODERS
* '''Style:''' FontSize = 14
===Test the Controllers===
===Test the Controllers===