2,706
edits
Changes
Jump to navigation
Jump to search
Line 54:
Line 54: − + − Or do it manually: There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].+ − − Also, if you like, you can build your own SD image following these instructions:
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 10:05, 24 October 2017
, 10:05, 24 October 2017→Zynthian Software
After downloading the SD-image, you have to write it to a SDcard. You need a minimum size of 16GB SDcard for the full ''Gorgona'' image or 8GB for the ''Gorgonilla'' lite image.
After downloading the SD-image, you have to write it to a SDcard. You need a minimum size of 16GB SDcard for the full ''Gorgona'' image or 8GB for the ''Gorgonilla'' lite image.
If you don't know how to do it, you can use Etcher https://etcher.io/ (free software works on Mac, Windows or Linux) to flash the image onto the SDcard.
If you don't know how to do it, you can use [https://etcher.io/ Etcher] (free software works on Mac, Windows or Linux) to flash the image onto the SDcard. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].
Finally, if you like, you can build your own SD image following these instructions:
[https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script]
[https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script]