2,705
edits
Changes
Jump to navigation
Jump to search
Line 335:
Line 335: + + + + Line 342:
Line 346: − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 13:01, 23 April 2018
, 13:01, 23 April 2018→Mount the MIDI activity LEDS
Insert the 3 LEDS in the case holes. You may want to push the LEDs with something more rigid than your finger. The screwdriver's handle could be fine.
Insert the 3 LEDS in the case holes. You may want to push the LEDs with something more rigid than your finger. The screwdriver's handle could be fine.
[[File:IMG_2223.JPG|600px]]
[[File:IMG_2224.JPG|600px]]
When it's done, you have to solder the 2 LED wires (red/black) with the 2 spare wires on the MIDI JST harness (white/yellow). Polarity is important, so don't cross the wires:
When it's done, you have to solder the 2 LED wires (red/black) with the 2 spare wires on the MIDI JST harness (white/yellow). Polarity is important, so don't cross the wires:
After soldering all the 3 LEDs, you may want to protect the connection with heat shrink sleeve, adhesive tape or hot melt glue.
After soldering all the 3 LEDs, you may want to protect the connection with heat shrink sleeve, adhesive tape or hot melt glue.
[PHOTO NEEDED HERE!!]
[[File:IMG_2226.JPG|600px]]
===Secure the Display===
===Secure the Display===