Fix the 4 controller modules to the case cover using the 4 bolts and washers attached to every rotary encoder.
Fix the 4 controller modules to the case cover using the 4 bolts and washers attached to every rotary encoder.
−
'''IMPORTANT:''' For avoiding problems while closing the case, i recommend to mount the controller modules with the connectors facing one another, NOT like it's shown in the photo below ('''the two lower modules should be rotated 180º'''). I will update the photo ASAP.
+
'''IMPORTANT:''' For avoiding problems while closing the case, i recommend to mount the controller modules with the connectors facing one another. See the photo below.