159
edits
Changes
Jump to navigation
Jump to search
Line 139:
Line 139: − + +
→HowTo:
==== HowTo: ====
==== HowTo: ====
# The order of the following steps is not important: Solder the capacitors, the 6- and 2-pin-rows and the Encoders on the board - that's it.
# '''Notice!''' Due to the mounting of the encoders on a front panel, the 6-pin-row must be soldered from the bottom of the PCB (pin counting will be 1..6 from the lower side of the PCB!). '''The picture below shows the WRONG component side! (newer images will follow)'''
# The order of the following steps is not important: Solder the capacitors, the 2-pin-rows and the Encoders on the board (on the upper side) - that's it.
# You have to do this twice - you need two encoder boards.
# You have to do this twice - you need two encoder boards.