Changes

The behaviour and status are '''similar of those in the hardware interface''': there is support for short, bold and long press; screen access buttons are blue when no function is selected, green on it's primary and orange on its secondary function; <code>ALT</code> key changes to violet when active (and <code>F1</code>-<code>F4</code> also change).

The behaviour and status are '''similar of those in the hardware interface''': there is support for short, bold and long press; screen access buttons are blue when no function is selected, green on it's primary and orange on its secondary function; <code>ALT</code> key changes to violet when active (and <code>F1</code>-<code>F4</code> also change).

The nearest four knobs has the functions of '''Knob#1''' to '''Knob#4'''. They can be used to control volume of selected/main chain, move vertically/horizontally in pattern editor or Zynpad, move selected item in menus, etc. Press <code>SHIFT</code> with a knob for a coarse (faster) adjustment. The knob press is activated using the first four soft keys to the left (in green), and also has short/bold press support. The mapping is: '''Knob#1''' = (<code>K1</code>, <code>CLIP STOP</code>); '''Knob#2''' = (<code>K5</code>, <code>SOLO</code>); '''Knob#3''' = (<code>K2</code>, <code>MUTE</code>); '''Knob#1''' = (<code>K6</code>, <code>REC ARM</code>). This scheme is very comfortable in the V4 four-corners layout.        

The nearest four knobs has the functions of '''Knob#1''' to '''Knob#4'''. They can be used to control volume of selected/main chain, move vertically/horizontally in pattern editor or Zynpad, move selected item in menus, etc. Press <code>SHIFT</code> with a knob for a coarse (faster) adjustment. The knob press is activated using the first four soft keys to the left (in green), and also has short/bold press support. The mapping is: '''Knob#1''' = (<code>K1</code>, <code>CLIP STOP</code>); '''Knob#2''' = (<code>K5</code>, <code>SOLO</code>); '''Knob#3''' = (<code>K2</code>, <code>MUTE</code>); '''Knob#1''' = (<code>K6</code>, <code>REC ARM</code>). This scheme is very comfortable in the V4 four-corners layout.

 

====The Step Sequencer mode====

====The Step Sequencer mode====