334
edits
Changes
Jump to navigation
Jump to search
Line 544:
Line 544: − + Line 550:
Line 550: − +
→Step 14: Plug the control flat cable into the main board: Grammar
[[File:capture000115_fixed_wiki.jpg|600px|right]]
[[File:capture000115_fixed_wiki.jpg|600px|right]]
'''2.''' Using two fingers, one each hand, softly pull the main board's control-1 connector tongue until it's open. Insert the flat ribbon cable coming from the control board (top part). Do it straight, without bending or twisting it in any way, so the blue side is downside.
'''2.''' Using two fingers, one on each hand, softly pull the main board's control-1 connector tongue until it's open. Insert the flat ribbon cable coming from the control board (top part). Do it straight, without bending or twisting it in any way, so the blue side is face down.
<br clear=all>
<br clear=all>
[[File:capture000116_fixed_wiki.jpg|600px|right]]
[[File:capture000116_fixed_wiki.jpg|600px|right]]
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one each hand, until it's totally closed. Put attention to the cable not moving out the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
<br clear=all>
<br clear=all>