334
edits
Changes
Jump to navigation
Jump to search
Line 437:
Line 437: − + Line 443:
Line 443: − + Line 449:
Line 449: − +
→Step 11: Plug the flat ribbon cable into the control board: Grammar
[[File:capture000085_fixed_wiki.jpg|600px|right]]
[[File:capture000085_fixed_wiki.jpg|600px|right]]
'''2.''' Carefully, using 2 fingers, one each hand, pull the control board's FPC connector tongue until it's totally open.
'''2.''' Carefully, using 2 fingers, one on each hand, pull the control board's FPC connector tongue until it's totally open.
<br clear=all>
<br clear=all>
[[File:capture000086_fixed_wiki.jpg|600px|right]]
[[File:capture000086_fixed_wiki.jpg|600px|right]]
'''3.''' Insert the ribbon cable into the FPC connector. It must be inserted straight, leaving the blue face downside.
'''3.''' Insert the ribbon cable into the FPC connector. It must be inserted straight, with the blue side face down.
<br clear=all>
<br clear=all>
[[File:capture000087_fixed_wiki.jpg|600px|right]]
[[File:capture000087_fixed_wiki.jpg|600px|right]]
'''4.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector. Put attention to the cable not moving out the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
'''4.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
<br clear=all>
<br clear=all>