This SD-image include all the zynthian software properly configured and ready to use. Plug and play! ;-)
This SD-image include all the zynthian software properly configured and ready to use. Plug and play! ;-)
−
After downloading the SD-image, you have to write it to a SD-card. Depending on your OS you have to choose how to create the SD-card. You need a minimum size of 16GB for the full ''Gorgona'' image and 8GB for the ''Gorgonilla'' lite image. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].
+
After downloading the SD-image, you have to write it to a SD-card. Depending on your OS you have to choose how to create the SD-card. You need a minimum size of 16GB for the full ''Gorgona'' image and 8GB for the ''Gorgonilla'' lite image.
+
+
Use Etcher https://etcher.io/ (free software works on Mac, Windows or Linux) to flash the image onto the SDcard.
+
+
Or do it manually:There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].
If you prefer, you can build your own SD image following these instructions:
If you prefer, you can build your own SD image following these instructions:
[https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script]
[https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script]