Changes

=The UI Screens=

=The UI Screens=

==Audio Mixer==

==Mixer==

[[File:Audio mixer.png|400px|right]]

[[File:Audio mixer.png|400px|right]]

The audio mixer view is the main or home screen. Bold press BACK will navigate to this screen from most locations within the Zynthian UI. It displays a mixer strip (or equivalent) for each configured chain plus a strip for the main mixbus. The quantity of strips displayed may be configured using webconf. If there are more chains than can be displayed, the screen can be scrolled horizontally by selecting a higher / lower chain or dragging the bottom legend strip.

The mixer view is the main screen and pressing '''bold-BACK''' should always navigate to this screen. It displays a strip for each configured chain plus a strip for the main mixbus. The quantity of strips displayed may be configured using webconf. If there are more chains than can be displayed, the screen can be scrolled horizontally by selecting a higher / lower chain or dragging the bottom legend strip.

Each audio chain will have the following mixer controls:

Each audio chain have the following mixer controls:

* '''Fader''' adjusts the audio level

* '''Fader''' adjusts the audio level

* '''Solo''' toggles the audio contribution to the solo mixbus^*

* '''Solo''' toggles the audio contribution to the solo mixbus^*

^* When solo is enabled on any chain, all other chains are muted. Solo can be enabled for multiple chains, each contributing to the output. Operating the main mixbus solo will disable solo on all chains.

(*) When solo is enabled on any chain, all other chains are muted. Solo can be enabled for multiple chains, each contributing to the output. Operating the main mixbus solo will disable solo on all chains.

Each audio chain also has a stereo audio level meter indicating peak programme level with peak hold bar. This may be disabled in admin menu or webconf to reduce CPU load if required.

Each audio chain also has a stereo audio level meter indicating peak programme level with peak hold bar. This may be disabled in admin menu or webconf to reduce CPU load if required.

Non-audio (MIDI only) chains show in the mixer view without any audio mixer controls.

MIDI only (non-audio) chains show in the mixer view without any audio mixer controls.

Use the SELECT knob or tap on a strip to select a chain.

Use the LAYER knob or drag the touchscreen to adjust the selected chain's fader.

* Rotate the SELECT knob or tap on a strip to select a chain.

Use the BACK knob to adjust the selected chain's balance / pan.

* Rotate the LAYER knob or drag the touchscreen to adjust the selected chain's fader.

Use the LEARN/SHOT knob or drag the touchscreen to adjust the main mixbus fader.

* Rotate the BACK knob to adjust the selected chain's balance / pan.

Short press LAYER to toggle solo of the selected chain.

* Rotate the LEARN/SHOT knob or drag the touchscreen to adjust the main mixbus fader.

Short press BACK to toggle mute of the selected chain.

* Press short-LAYER to toggle solo of the selected chain.

Short press LEARN/SHOT to enter MIDI learn mode.

* Press short-BACK to toggle mute of the selected chain.

Short press SELECT to access the chain's Control View.

* Press short-LEARN/SHOT to enter MIDI learn mode.

Bold press LAYER to access the main menu.

* Press short-SELECT to access the chain's Control View.

Bold press LEARN/SHOT to access snapshots.

* Press bold-LAYER to access the main menu.

Bold press SELECT to access the selected chain's options.

* Press bold-LEARN/SHOT to access snapshots.

* Press bold-SELECT to access the selected chain's options.

==Main Menu==

==Main Menu==