334
edits
Changes
Jump to navigation
Jump to search
Line 146:
Line 146: − +
Building a Zynthian Box using an official Kit v4.1 (view source)
Revision as of 12:29, 15 December 2020
, 12:29, 15 December 2020→Mount the MIDI activity LEDS
===Mount the MIDI activity LEDS===
===Mount the MIDI activity LEDS===
Insert the 3 LEDS in the case from the outside, with the short lead on the left looking from within the case. Make sure you push the LEDs by the plastic collar around the LED, not the LED itself. This may require some force due to the friction fit of the LED within the hole. This may be assisted with a small tube with internal diameter of 3mm, e.g. 3-4mm socket spanner or the narrow end of the plastic body of a ball point pen (with its stylus removed).
Insert the 3 LEDS in the case from the outside, with the short lead on the left looking from within the case. Make sure you push the LEDs by the plastic collar around the LED, not the LED itself. This may require some force due to the friction fit of the LED within the hole. This may be assisted with a small tube with internal diameter of approximately 3mm, e.g. 3-4mm socket spanner or the narrow end of the plastic body of a ball point pen (with its stylus removed).