Changes

===Connect the Controller Modules (x4)===

===Connect the Controller Modules (x4)===

This step is a bit tricky. Remember that, if you followed the instructions before, you have soldered the pin-rows in the bottom side of PCBs, so numbering is reversed when looking from bottom. You can use a little trick: if you rotate the PCB 180º, then numbering is "left to right" again ;-)

This step is a bit tricky. If you followed the instructions above, you have soldered the pin-rows in the bottom side of the controller PCBs, so numbering is reversed when looking from the bottom. You can use a little trick: rotate the PCB 180º and the numbering is "left to right" again ;-)

So '''you should look at your controller modules from bottom side and with the pin-row on the top of PCB!'''

Anyway, if you take a look to the next photo, you shouldn't have any problem. Brown/green wires are #1.

[[File:Zynthian_mounting_controllers.jpg|600px]]

[[File:Zynthian_mounting_controllers.jpg|600px]]