Changes

Jump to navigation Jump to search

Accessing Zynthian from your computer (view source)

Revision as of 10:12, 13 April 2024

5,393 bytes added ,  13 April
m
Changed some heading titles and tried to group them in a way that makes more sense
Line 1: Line 1:  +
Zynthian offers additional ways to access the system from your computer using either an ethernet or wifi connection. The ''Zynthian Web Configuration Tool'' is a web interface to view and configure settings e.g. midi devices, preset libraries etc. Graphical user interfaces for synth engines and the pedalboard style LV2 plugin patch ''MOD-UI'' are also accessible from your web browser.
 +
 
== Network Connection ==
 
== Network Connection ==
   −
The easier way of connecting your Zynthian is to use the Ethernet RJ45 connector with a CAT-5 cable to connect your unit to your local network (DHCP) or directly to your computer (Ethernet to Ethernet, aka link-local). Your Zynthian box uses the link-local name "zynthian.local" and its filesystem can be accessed with '''sftp''' and '''scp''' (If you are using Windows, use '''Winscp''' - free software needed to communicate using this Internet protocol).  
+
The easiest way to connect your Zynthian is to use the Ethernet RJ45 connector with a CAT-5 cable to connect your unit to your local network (DHCP) or directly to your computer (Ethernet to Ethernet, aka link-local). Your Zynthian box uses the link-local name "zynthian.local" or "zynthian.lan", depending on your system.
   −
You can also login with '''ssh''' to access the Linux console. see [[Command_Line_User_Guide]] (use '''PuTTY''' software for Windows). The username and default password are:
+
If the link-local address (zynthian.local or zynthian.lan) is not found, make sure that the link-local feature is enabled in your system. Sometimes it's disabled and link-local names are not recognized (windows). If you can't manage to get link-local names to work, you can use the Zynthian's IP address.  The zynthian's IP address can be found int the UI's "Admin->Network Info" menu, and it's also printed on the zynthian's error screen. See: [[Finding your IP address]]
   −
user=root
+
=== Wifi Configuration ===
−
password=raspberry
+
 
 +
Wifi credentials can be set via the web config tool: System - Wifi - Add Network. Wifi must be enabled in the Zynthian Gui: press the Back button until you are in the Admin menu. Then select 'Start WIFI'.
 +
 
 +
=== Wifi Hotspot ===
 +
 
 +
You can connect to your Zynthian using the built-in Wifi Hotspot mode. This is less convenient than using Ethernet or an existing Wifi network, and is mostly useful to configure connections to other wifi networks.
   −
If the link-local address (zynthian.local) is not found, test that the link-local feature is enabled in your system. Sometimes is disabled and local names are not recognized (i.e. on Windows). Instead, you can use the Zynthian's IP address.  Find out what that is using the "Network Info" utility in the Zynthian's Admin menu. or See: [[Finding your IP address]]
+
# Open the Admin screen on your Zynthian.
 +
# Select the "Wifi Hotspot" option. This could take up to 30 seconds to complete.
 +
# Connect to the "zynthian" network with another device.
 +
# In the Admin screen on your Zynthian, select "Network Info".
 +
# Connect to the displayed IP address with the browser on your other device.
   −
== Accessing the Web Configuration Tool ==
+
Note that the wifi network created in hotspot mode allows anyone to connect. If using the wifi hotspot in a public place, ensure you've changed your Zynthian password.
   −
You can access web configuration tool using the web browser from your computer:
+
== Ways to Access Zynthian From Your Computer ==
   −
# Connect your Zynthian to your local network using the ethernet connector (RJ45) or directly to your computer (Ethernet to Ethernet)
+
=== Connecting via SSH and Accessing the File System ===
−
# Open the browser in your computer and type in the address bar:
     −
zynthian.local  (or the IP address of your Zynthian)
+
The filesystem can be accessed with '''sftp''' and '''scp''' (If you are using Windows, use '''Winscp''' - free software needed to communicate using this Internet protocol).
   −
(If zynthian.local does not work, see [[Finding your IP address]] )
+
You can also login with '''ssh''' to access the Linux console. see [[Command_Line_User_Guide]] (use '''PuTTY''' for Windows). The username and default password is:
   −
The web config tool will load and prompt for the admin password. It is "raspberry".
+
user=root
 +
password=raspberry
   −
[[File:zynthian_webconf_login.png]]
+
=== Accessing the Web Configuration Tool ===
   −
Here's details on using the Web configuration tool: [[Configuration_Users_Guide]]
+
You can access the web configuration tool using the web browser from your computer:
   −
== Wifi Configuration ==
+
# Connect your Zynthian to your local network using the ethernet connector (RJ45) or directly to your computer (Ethernet to Ethernet)
 +
# Open the browser in your computer and type in the address bar:
   −
Wifi credentials can be set via the web config tool: System - Wifi - Add Network. Wifi must be enabled in the Zynthian Gui: press the Back button until you are in the Admin menu. Then select 'Start WIFI'.
+
[http://zynthian.local http://zynthian.local] or [http://zynthian.lan http://zynthian.lan]  (or the IP address of your Zynthian)
   −
== Accessing the MOD-UI web interface ==
+
{{NoteBox|If zynthian.local does not work, see [[Finding your IP address]]
   −
If you have a recent zynthian image with MOD integration (Gorgona or later), you can access the MOD-UI web interface using the web browser from your computer:
+
<br>''If you can't access WebConf with your browser, there is a command-line option. See [[Command_Line_User_Guide#Configuration_without_WebConf]]''}}
   −
# Connect your Zynthian to your local network using the ethernet connector (RJ45) or directly to your computer (ethernet to ethernet)
+
The web config tool will load and ask for the admin password. The default password is "raspberry".
−
# Open the browser in your camputer and type in the address bar:
     −
zynthian.local:8888
+
[[File:zynthian_webconf_login.png|right|500px]]
   −
The MOD-UI webpage should appear. Enjoy! ;-)
+
Here are the details on using the Web configuration tool: [[Zynthian Web Configuration Tool User Guide]]
 +
<br clear=all>
   −
If the link-local address (zynthian.local) is not found, test that the link-local feature is enabled in your system. Sometimes is disabled and local names are not recognized.
  −
Instead, you can use the zynthian's IPaddress.  Find out what that is using the "Network Info" utility in the Zynthian's Admin menu.
     −
== Opening Synth Engine Native GUIs in your Computer ==
     −
Some engines have a native GUI that can be accessed from your desktop/laptop computer. There are several methods for achieving this:
+
=== Accessing the MOD-UI web interface ===
 +
[[File:MODUI.png|right|500px|MOD-UI pedal board style interface]]
 +
You can access the MOD-UI web interface using the web browser from your computer:
   −
===X11 Server===
+
* Create a Special Layer with a "MOD-UI" engine from the Zynthian's UI
 +
* Connect your Zynthian to your local network using the ethernet connector (RJ45) or directly to your computer (ethernet to ethernet)
 +
* Open the browser in your computer and navigate to:
   −
For using this method, you need an X11 Server running on your desktop/laptop computer.
+
[http://zynthian.local:8888 http://zynthian.local:8888] or  [http://zynthian.lan:8888 http://zynthian.lan:8888]
   −
* If you use Linux, probably you already have it, so you don't need to do nothing special. Simply login into your zynthian using the ssh with the "-Y" option for forwarding the X session:
+
The MOD-UI webpage should appear.
   −
  $ ssh -Y root@zynthian.local
+
When a MOD-UI layer exist, this link is also accessible from the webconf's software menu (reload webconf after creating the layer).
   −
* If you are a "Mac" user, you should install and enable the '''XQuartz''' package. After that, login into your zynthian with the same command.
+
If the link-local address (zynthian.local or zynthian.lam) is not found, test that the link-local feature is enabled in your system. Sometimes is disabled and local names are not recognized. You can use the zynthian's IP address instead. See: [[Finding your IP address]]
   −
* If you are a "Windows" user, then you should install the '''XMing''' package and login into your zynthian using Putty with the "X11 forwarding" option enabled.
+
=== Viewing Zynthian UI and Synth Engine Native GUIs on your Computer ===
 +
[[File:Synth engines native gui.png|right|500px|Synth engines native GUI]]
 +
Some engines have a native GUI that can be accessed from your desktop/laptop computer. Zynthian provides a VNC viewer for a desktop that allows access to these native GUI. By default VNC is disabled and it is recommended to disable for performance (as it has a small overhead which is best saved for your audio). To enable VNC and access the desktop and engines' native GUI:
   −
[[File:Putty-on-zynth-X11.png]]
+
* Connect via web browser to webconf
 +
* Navigate to INTERFACE->UI Options
 +
* Assert Enable VNC Server option and press Save
 +
* Reload webconf and navigate to INTERFACE->UI-Engines
 +
* Enter the Zynthian password (default: raspberry)
   −
===VNC===
+
Note: There is also an option to access the Zynthian main UI by navigating to INTERFACE-VNC UI. This is a mirror of the main UI and may be driven from VNC and/or the physical interface.
   −
You also could use VNC on any platform, although it's slighty complex:
+
The VNC views may be accessed directly via the URLs:
   −
* Login into your zynthian box and enter:
+
* http://zynthian.local:6080/vnc.html (Main UI)
 +
* http://zynthian.local:6081/vnc.html (Engines desktop)
   −
  # apt-get install vnc4server blackbox
+
or with a VNC client by connecting to ports:
−
  # pico ~/.vncrc
     −
* enter this line to set the desktop size:
+
* 5900 (Main UI)
 +
* 5901 (Engines desktop)software can be launched, like ''qjackctl'' or a virtual MIDI keyboard for testing.
   −
    $geometry = “2048x1600”;
+
Tip: You can automatically connnect and login to web-based VNC by appending parameters to the URL, e.g. http://zynthian.local:6080/vnc.html?autoconnect=true&password=raspberry
   −
* start the vnc server:
+
====Supported Engines with Native GUI====
   −
  # vnc4server
+
Many LV2 plugins (NoizeMaker, OBX-d, Surge, DragonFly Reverbs, ...) and some of the standalone engines (ZynAddSubFX, Aeolus, Pianoteq and PureData) have support for remotely displaying their native GUIs. If VNC is enabled, the engine's GUI will be launched automatically when added to a chain.
 +
{{NoteBox|Using an ethernet-to-ethernet (cable) connection will reduce remote GUI latency and improve usability.}}
   −
* Connect to the vnc server using (e.g.) windows TightVNC viewer.
+
== Uploading your presets & soundfonts to Zynthian ==
   −
===Supported Engines with Native GUI===
+
The easiest way of getting your presets & soundfonts inside your zynthian is by using the webconf's preset manager:
   −
Currently ''ZynAddSubFX'', ''Aeolus'' and ''Pure Data'' have support for native GUI, that is launched automatically when layer is created. Other GUI software can be launched, like ''qjackctl'' or a virtual MIDI keyboard for testing. Support for Soundfont GUI using ''Polyphone'' will be added in the future ;-)
+
  http://zynthian.local/lib-presets
   −
'''IMPORTANT:''' Using an ethernet-to-ethernet (cable) connection will reduce latency and improve usability.
+
From there you manage your preset & soundfont libraries: renaming, deleting, and uploading, including automatic conversion from some native formats:
   −
== Copying your presets/soundfonts to Zynthian ==
+
* DX7 SysEX files
 +
* OBXd FXB files
 +
* synthv1 native format
 +
* padthv1 native format
   −
You can copy your presets/soundfonts/pedalboards in the next folder:
+
If if this doesn't work for you, or you prefer to do it by hand, you can copy your presets/soundfonts/pedalboards into the next folder:
    
  /zynthian/zynthian-my-data
 
  /zynthian/zynthian-my-data
   −
There are different subfolders:
+
This is the subfolder structure:
   −
  + mod-pedalboards
+
  + '''presets'''
−
  + soundfonts
+
  + zynaddsubfx
−
   + gig
+
  + puredata
−
   + sfz
+
  + pianoteq
−
   + sf2
+
  + lv2
−
  + snapshots
+
  + mod-ui
−
  + zynbanks
+
  + '''soundfonts'''
 +
   + '''sf2'''
 +
    + bank-1.sf2
 +
    + ...
 +
    + bank-n.sf2
 +
   + '''sfz'''
 +
    + bank-1
 +
      + sfz-bundle1
 +
      + ...
 +
      + sfz-bundle2
 +
    + ...
 +
    + bank-n
 +
   + '''gig'''
 +
    + bank-1
 +
      + instrument-1.gig
 +
      + ...
 +
      + instrument-n.gig
 +
    + ...
 +
    + bank-n
 +
  + '''snapshots'''
 +
  + '''capture'''
   −
In 'mod-pedalboards' you will find your stored MOD-UI pedalboards.
+
SFZ and GIG soundfonts are used with LinuxSampler. SF2 soundfonts are used with FluidSynth. SFZ and GIG soundfonts must be organized in 'bank' subfolders. SF2 files are considered "banks" by itself.
−
Use SFZ and GIG soundfonts with LinuxSampler. SF2 soundfonts must be used with FluidSynth. SFZ and GIG fonts must be stored in 'category' subfolders.
  −
User's ZynAddSubFX presets/banks must be stored in the "zynbanks" directory.
      
If you have doubts of how to store your data, take a look in this directory:
 
If you have doubts of how to store your data, take a look in this directory:
Line 112: Line 154:  
  /zynthian/zynthian-data
 
  /zynthian/zynthian-data
   −
Here you will find the same folder structure, with some additions.
+
Here you will find the same folder structure, and could help you to understand.
   −
If you are really interested, you could, for instance, edit the setBfree configuration, and change the CC assignments, etc.
+
Also it's interesting:
   −
'''IMPORTANT:''' after adding or changing something in 'zynthian-data', you can’t update the zynthian-library from the Admin menu. (The "git-based" updating system should be improved...)
+
/zynthian/config
   −
If you are using an old SD image (prior to Gorgona), the username and password are the default for Raspbian:
+
If you are really interested, you could, for instance, edit the setBfree configuration, and change the CC assignments, etc.
   −
user=pi
+
{{WarningBox|If you add or change something inside the ''zynthian-data'' folder, your changes will be lost on the next update, or, in a worst case scenario, you could break the update system.}}
−
password=raspberry
     −
==CUIA Callable UI Actions==
+
== OSC (Open Sound Control)==
   −
The Zynthian may be controlled by MIDI messages applied to the Master MIDI Channel (default 16) defined in The Webconf Interface
+
Open Sound Control (OSC) is a protocol for networking sound synthesizers, computers, and other multimedia devices for purposes such as musical performance or show control. Zynthian implements OSC in various ways.
   −
The Interface allows applying on MIDI IN commands on channel 16 (default) that mimic various zynthian gui interface commands with some functional short cuts also provided ('POWER_OFF', ALL_NOTES_OFF').
+
For more information about the protocol see [https://en.wikipedia.org/wiki/Open_Sound_Control Open Sound Control] at Wikipedia and [https://youtu.be/rf8YNPjVvF4 this explanatory video].
   −
The Message is sent as a Note on Message (0x9)
+
==== CUIA: Callable User Interface Actions ====
 +
The CUIA is an unidirectional remote API that can be used to send simple control messages to zynthian UI. The CUIA can be accessed in several ways, as described in the [[Zynthian_UI_Users_Guide#CUIA:_Callable_UI_Actions|user's guide]] and this section explains how to access the CUIA using OSC on port UDP 1370.
   −
So To Power Off a zynthian one sends
+
The OSC base path for CUIA messages is:
−
0x9F  ( Channel 16 Note ON)
  −
0x00  ( Note code for POWER_OFF as below )
  −
0x00  (Velocity/parameter)
     −
This is why you should operate secure networks . . . :-D
+
  /cuia
    +
Example:
 +
/cuia/restart_ui
    +
Note that CUIA paths are case insensitive, e.g.
 +
/cuia/reboot
   −
"0": "POWER_OFF",
+
is interpreted the same as
−
  "1": "REBOOT",
+
  /CUIA/REBOOT
−
"2": "RESTART_UI",
  −
"3": "RELOAD_MIDI_CONFIG",
     −
"10": "ALL_NOTES_OFF",
+
Some examples using the command line tool "send_osc":
−
  "11": "ALL_SOUNDS_OFF",
+
  # send_osc 1370 /CUIA/SCREEN_MENU
−
  "12": "ALL_OFF",
+
  # send_osc 1370 /CUIA/LAYER_CONTROL 2
   −
"51": "SELECT",                    D#3/Eb3
+
An example Python script to start a MIDI recording:
−
  "52": "SELECT_DOWN",                E3
+
  import liblo
−
  "53": "SELECT_UP",                 F3
+
  liblo.send(('zynthian.local', 1370), "/CUIA", ('s', 'START_MIDI_RECORD'))
   −
"64": "SWITCH_BACK_SHORT",          E4
+
And finally, the full list of CUIAs:
−
"63": "SWITCH_BACK_BOLD",           D#4/Eb4
  −
"62": "SWITCH_BACK_LONG",          D4
     −
"65": "SWITCH_SELECT_SHORT",       F4
+
{| class="wikitable"
−
"66": "SWITCH_SELECT_BOLD",         F#4/Gb4
+
|+
−
"67": "SWITCH_SELECT_LONG",         G4
+
|-
−
+
! CUIA Name !! Parameters !! Description
−
"60": "SWITCH_LAYER_SHORT",         C4
+
|-
−
"61": "SWITCH_LAYER_BOLD",         C#4/Db4
+
| ACTION_MIDI_UNLEARN || ||
−
"59": "SWITCH_LAYER_LONG",          B4
+
|-
 +
| ALL_NOTES_OFF || ||
 +
|-
 +
| ALL_SOUNDS_OFF || ||
 +
|-
 +
| ARROW_DOWN || ||
 +
|-
 +
| ARROW_LEFT || ||
 +
|-
 +
| ARROW_NEXT || ||
 +
|-
 +
| ARROW_PREV || ||
 +
|-
 +
| ARROW_RIGHT || ||
 +
|-
 +
| ARROW_UP || ||
 +
|-
 +
| AUDIO_FILE_LIST || ||
 +
|-
 +
| BACK || ||
 +
|-
 +
| BANK_PRESET || ||
 +
|-
 +
| CHAIN_CONTROL || %i || Set active layer to %i and show control screen. Defaults to current chain.
 +
|-
 +
| CHAIN_OPTIONS || %i || Show options for chain %i. Defaults to current chain.
 +
|-
 +
| CLEAN_ALL || ||
 +
|-
 +
| ENTER_MIDI_LEARN || ||
 +
|-
 +
| EXIT_MIDI_LEARN || ||
 +
|-
 +
| EXIT_UI || ||
 +
|-
 +
| HIDE_BUTTONBAR || ||
 +
|-
 +
| HIDE_SIDEBAR || ||
 +
|-
 +
| HIDE_TOPBAR || ||
 +
|-
 +
| LAST_STATE_ACTION || ||
 +
|-
 +
| LAYER_CONTROL || %i || Alias of CHAIN_CONTROL. DEPRECATED!!
 +
|-
 +
| LAYER_OPTIONS || %i || Alias of CHAIN_OPTIONS. DEPRECATED!!
 +
|-
 +
| MENU || ||
 +
|-
 +
| MIDI_LEARN_CONTROL || %i || Learn control knob %i
 +
|-
 +
| MIDI_LEARN_CONTROL_OPTIONS || % || Learn control options for knob %i
 +
|-
 +
| MIDI_UNLEARN_CHAIN || ||
 +
|-
 +
| MIDI_UNLEARN_CONTROL || %i || Unlearn control knob %i
 +
|-
 +
| MIDI_UNLEARN_MIXER || ||
 +
|-
 +
| MIDI_UNLEARN_NODE || ||
 +
|-
 +
| POWER_OFF || ||
 +
|-
 +
| PRESET || ||
 +
|-
 +
| PRESET_FAV || ||
 +
|-
 +
| PROGRAM_CHANGE || ||
 +
|-
 +
| REBOOT || ||
 +
|-
 +
| RELOAD_KEY_BINDING || ||
 +
|-
 +
| RELOAD_MIDI_CONFIG || ||
 +
|-
 +
| RELOAD_WIRING_LAYOUT || ||
 +
|-
 +
| RESTART_UI || ||
 +
|-
 +
| SCREEN_ADMIN || ||
 +
|-
 +
| SCREEN_ALSA_MIXER || ||
 +
|-
 +
| SCREEN_ARRANGER || ||
 +
|-
 +
| SCREEN_AUDIO_MIXER || ||
 +
|-
 +
| SCREEN_BANK || ||
 +
|-
 +
| SCREEN_CALIBRATE || ||
 +
|-
 +
| SCREEN_CONTROL || ||
 +
|-
 +
| SCREEN_MAIN_MENU || ||
 +
|-
 +
| SCREEN_MIDI_RECORDER || ||
 +
|-
 +
| SCREEN_PATTERN_EDITOR || ||
 +
|-
 +
| SCREEN_PRESET || ||
 +
|-
 +
| SCREEN_SNAPSHOT || ||
 +
|-
 +
| SCREEN_ZS3 || ||
 +
|-
 +
| SCREEN_ZYNPAD || ||
 +
|-
 +
| SELECT || %i || Highlight element %i in the list
 +
|-
 +
| SET_TEMPO || %t || Set tempo BPM
 +
|-
 +
| SHOW_BUTTONBAR || ||
 +
|-
 +
| SHOW_SCREEN || ||
 +
|-
 +
| SHOW_SIDEBAR || ||
 +
|-
 +
| SHOW_TOPBAR || ||
 +
|-
 +
| START_AUDIO_PLAY || ||
 +
|-
 +
| START_AUDIO_RECORD || ||
 +
|-
 +
| START_MIDI_PLAY || ||
 +
|-
 +
| START_MIDI_RECORD || ||
 +
|-
 +
| STOP || ||
 +
|-
 +
| STOP_AUDIO_PLAY || ||
 +
|-
 +
| STOP_AUDIO_RECORD || ||
 +
|-
 +
| STOP_MIDI_PLAY || ||
 +
|-
 +
| STOP_MIDI_RECORD || ||
 +
|-
 +
| TAP_TEMPO || ||
 +
|-
 +
| TEMPO || ||
 +
|-
 +
| TEMPO_DOWN || ||
 +
|-
 +
| TEMPO_UP || ||
 +
|-
 +
| TEST_MODE || ||
 +
|-
 +
| TOGGLE_ALT_MODE || ||
 +
|-
 +
| TOGGLE_AUDIO_PLAY || ||
 +
|-
 +
| TOGGLE_AUDIO_RECORD || ||
 +
|-
 +
| TOGGLE_MIDI_LEARN || ||
 +
|-
 +
| TOGGLE_MIDI_PLAY || ||
 +
|-
 +
| TOGGLE_MIDI_RECORD || ||
 +
|-
 +
| TOGGLE_PLAY || ||
 +
|-
 +
| TOGGLE_RECORD || ||
 +
|-
 +
| TOGGLE_SCREEN || ||
 +
|-
 +
| V5_ZYNPOT_SWITCH || %i, %t || Simulates V5 rotary-switch %i action of type %t (Push ,Short, Bold, Long)
 +
|-
 +
| Z2_ZYNPOT_TOUCH || %i, %s || Simulates Z2 capacitive touch-switch %i
 +
|-
 +
| ZYNAPTIK_CVIN_SET_NOTE0 || %n || Set base note for CV/Gate input
 +
|-
 +
| ZYNAPTIK_CVIN_SET_VOLTS_OCTAVE || %f || Set scale for CV/Gate input
 +
|-
 +
| ZYNAPTIK_CVOUT_SET_NOTE0 || %n || Set base note for CV/Gate output
 +
|-
 +
| ZYNAPTIK_CVOUT_SET_VOLTS_OCTAVE || %f || Set scale for CV/Gate output
 +
|-
 +
| ZYNPOT || %i, %s || Simulates rotary %i tick of size %s
 +
|-
 +
| ZYNSWITCH || %i, %t || Simulates button %i action of type %t (Push, Short, Bold, Long)
 +
|}
   −
"71": "SWITCH_SNAPSHOT_SHORT",      B5
+
You can see the details in the [https://github.com/zynthian/zynthian-ui/blob/3ce8a5e0f22d4007a5460f61869678b5c78d6f69/zyngui/zynthian_gui.py#L1132 Zynthian UI's source code].
−
"72": "SWITCH_SNAPSHOT_BOLD",      C5
  −
"73": "SWITCH_SNAPSHOT_LONG"        C#5/Db5
  −
 
  −
[[File:2Oct_Keyboard_CUIA.png|400px|Keyboard]]
  −
 
  −
 
  −
== OSC ==
  −
 
  −
Open Sound Control (OSC) is a protocol for networking sound synthesizers, computers, and other multimedia devices for purposes such as musical performance or show control. Zynthian implements OSC in various ways.
  −
 
  −
=== CUIA ===
  −
The CUIA features described above may be controlled using OSC on port 1370 using UDP datagrams. The OSC path for CUIA messages is
  −
/cuia
  −
Example:
  −
/cuia/reboot
  −
Note: CUIA paths are case insensitive, e.g.
  −
/cuia/reboot
  −
is interpreted the same as
  −
/CUIA/REBOOT
     −
=== TouchOSC ===
+
==== TouchOSC ====
−
TouchOSC protocol is supported if the option is enabled on the Zynthian admin menu. This accepts OSC on port 12101 using UDP datagrams and includes raw MIDI data interpretation on OSC path
+
The TouchOSC protocol is supported if the option is enabled in the Zynthian admin menu. This accepts OSC on port 12101 using UDP datagrams and includes raw MIDI data interpretation on OSC path
 
  /midi
 
  /midi
 
This path accepts an OSC MIDI type message. An example Python script to send MIDI note on / off messages:
 
This path accepts an OSC MIDI type message. An example Python script to send MIDI note on / off messages:
Lfo
193

edits

Retrieved from "http://wiki.zynthian.org/index.php/Special:MobileDiff/10380...13743"

Navigation menu