1,019
edits
Changes
Jump to navigation
Jump to search
→How does the zynthian understand the encoders?
Line 109:
Line 109:
+Now, obviously if you are using the zynaptik-3 then you merely have to select the appropriate configuration option in Wiring Layout and it should all just work, but if you are here you are probably rolling your own device. So you should select Custom. AS this makes no assumptions about your configuration and allows you to define your own configuration that you can save under it's own name. One of the most telling realisations one makes if you are doing this for the first time is that the details you can spend a couple of weekends puzzling over like which wire goes to which pin instantly gets forgotten as soon as it all works, and when revisited, needs to be completely worked out from first principles because you didn't make a record and you have rebuilt your zynthian from a clean software image. +Do the housekeeping!
− Makes notes!!+
Now, obviously if you are using the zynaptik-3 then you merely have to select the appropriate configuration option in Wiring Layout and it should all just work, but if you are here you are probably rolling your own device. So you should select Custom. AS this makes no assumptions about your configuration and allows you to define your own configuration that you can save under it's own name. One of the most telling realisations one makes if you are doing this for the first time is that the details you can spend a couple of weekends puzzling over like which wire goes to which pin instantly gets forgotten as soon as it all works, and when revisited, needs to be completely worked out from first principles because you didn't make a record and you have rebuilt your zynthian from a clean software image.
+Do the housekeeping!
+
+ Makes notes!!
+===What do the numbers in the boxes mean?===
+====Encoders A-pins====
+====Encoders B-pins====
+====Encoders Switches Pins ====
+====MCP23017 I2C Address ====
+====MCP23017 INT-A Pin ====
+====MCP23017 INT-B Pin ====
+====Zynaptik Config====
−====ADS1115 I2C Address ====
−====MCP4728 I2C Address ====
==Encoders directly connected to GPIO Pins==
==Encoders directly connected to GPIO Pins==