505
edits
Changes
Jump to navigation
Jump to search
Line 521:
Line 521: − + Line 527:
Line 527: − +
→Step 13: Plug the display flat cable into the display: Grammar
[[File:capture000109_fixed_wiki.jpg|600px|right]]
[[File:capture000109_fixed_wiki.jpg|600px|right]]
'''2.''' Using two fingers, one each hand, softly pull the display's FPC tongue until it's open. Insert the flat ribbon cable coming from the RPi4 in the bottom's part. Do it straight, without bending or twisting it in any way, so the blue side is downside.
'''2.''' Using two fingers, one on each hand, softly pull the display's FPC tongue until it's open. Insert the flat ribbon cable coming from the RPi4 into the bottom's part. Do it straight, without bending or twisting it in any way, so the blue side is face down.
<br clear=all>
<br clear=all>
[[File:capture000110_fixed_wiki.jpg|600px|right]]
[[File:capture000110_fixed_wiki.jpg|600px|right]]
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one each hand, until it's totally closed. Put attention to the cable not moving out the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
<br clear=all>
<br clear=all>