2,706
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − - connect the zynthian box to your router using a RJ45 cable+ − - '''update zynthian software''' from the admin menu − - '''update zynthian library''' from the admin menu − - '''restart GUI''' (or '''reboot''') from the admin menu − The last official SD image is '''Gorgona''' and you can get it [https://discourse.zynthian.org/t/merry-zynthians-and-happy-new-sd-image/314 from here]. Also, you can build your own SD image from scratch following [https://discourse.zynthian.org/t/new-sd-image-setup-script/283/17 these instructions].+ + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and having the controllers working OK is update the software:
If you are using an official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box is update the software.
===Updating from the UI===
If your Zynthian's UI is working OK and you can control the interface using the knobs or the touch screen, you can update your software very easily:
# Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. Alternately, you can configure the WIFI connection using the Webconf tool.
# Click '''update software''' from the UI's Admin Menu
# Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
===Updating from the Browser (webconf)===
You can also update your zynthian from your browser, using the Webconf tool at this address:
http://zynthian.local
or
http://#ZYNTHIAN_IP#
===Updating from the CLI===
Finally, you can update from the command line, using this command:
update_zynthian.sh
If you don't know how to access your zynthian using the command line, read this:
[[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]