334
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − − − Line 15:
Line 12: + + + + + +
Adds comment about setting date before updating Gorgona Omega
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software.
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software. You can do it easily from the Zynthian's UI:
You can do it easily from the Zynthian's UI:
* Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
* Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
* Click '''update software''' from the UI's Admin Menu
* Click '''update software''' from the UI's Admin Menu
* Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
* Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
You can also do it from the command line using this command:
You can also do it from the command line using this command:
* [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]
* [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]
If using Gorgona Omega then you will need to set the clock on the Raspberry Pi before the update will work.
date -s YYYY-MM-DD
where YYYY is the year, MM is the month and DD is the date.