Changes

* '''ALT mode''': Program Change 5-8

* '''ALT mode''': Program Change 5-8

Not much more to say about these buttons.

This default configuration is fine for learning/recalling subsnapshots (ZS3) and you will find it's really useful if you use your zynthian as a keyboard expander.

<br clear=all>

<br clear=all>

{{NoteBox|Although all buttons and switches are fully configurable from the webconf tool (''hardware->wiring->advanced''), this guide refers to the official V5 profile configuration, that matches button printings. Of course, you are very welcome to experiment with button assignment and try different configurations. In fact, if you reach a sweet point, we could manage to produce an alternate keypad with custom printings. Simply contact us at the [https://discourse.zynthian.org zynthian forum]!}}

{{NoteBox|Although all buttons and switches are fully configurable from the webconf tool (''hardware->wiring->advanced''), this guide refers to the official V5 profile configuration, that matches button printings. Of course, you are very welcome to experiment with button assignment and try different configurations. In fact, if you reach a sweet point, we could manage to produce an alternate keypad with custom printings. Simply contact us at the [https://discourse.zynthian.org zynthian forum]!}}